How to install Putian wall system
1. First, the back wall refers to the installation of the roof, and then the installation of the wall. When installing the roof, the keel should be fixed first, and the first side of the whole wall should be fixed on the wall with steel nails. After each installation, one side is connected with the integrated front wall, and the other side is fixed with steel nails. Pay attention to the overall design of the image when installing. You must first divide the frame and install it according to the pre-designed drawings.
2. According to the conventional estimation, the coverage area of the wall is three times that of the land, including the wall and the top surface. The basic installation area is in this area. The calculation method of the actual area of the belonging area includes: according to the actual area estimation, after completing the rewinding, the downward height of the upper part is basically guaranteed to be no less than 2.75 meters, and the maximum number can be guaranteed during the installation process after calculation. Eliminate unnecessary losses.
3. Putian wall system should pay attention to the alignment of splicing patterns according to the design drawings and the actual size of the wall. According to the horizontal control line, the keel can be a self-tapping screw or rivet and should not be omitted. Installation sequence: the first corner after sewing, the first big wall and the bottom rear window have yin and yang angles and the jacking force of sewing and installation accessories.
Installation points of Putian wall system
1. According to the design requirements, the wood structure must be made. When operating, it should be noted that the structure on the wooden side has enough points to fix the whole wall; The edge of the wood is fixed on the other side; Consistent; The structure is relatively strong; Once the wood structure is completed, the actual wiring will be carried out and the wires will be preserved.
2. If the wall is uneven, the wall must be leveled before installation. Through the above brief introduction, you can get a preliminary understanding of the installation method of integrated wall. In a word, Apache's integrated wall decoration simplifies the tedious traditional craft and can be directly installed on the rough room wall. It greatly shortens the updating time and saves a lot of renovation costs.
3. The size of Putian wall system should not exceed 2mm, otherwise the joints will be unclean. In the process of wall-to-wall installation, whether there are wires, waist lines, door wire sleeves, window cover lines, etc. , the overall installation, the installation process should pay attention to the specifications of the line.
The above is the information about the Futenma Wall System compiled by Bian Xiao today.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~