2. Capitalization of one
How to write ten in capital 1- 10?
Capitalized Chinese characters range from 1 to 10 ":one, two, three, four, five, six, seven, eight, nine and ten.
No matter * * * numbers (1, 2,3 ...) or so-called Chinese lowercase numbers (1, 2,3 ...), they are easy to be altered and tampered with because of their simple strokes. Therefore, the numbers on general documents and commercial financial bills should be capitalized in Chinese characters: one, two, three, four, five, land, seven, eight, nine, pick up, hundred and thousand (the strokes of "ten thousand, one hundred and one trillion" are complicated and seldom used, so there is no need to replace them with other words). For example, "3,564 yuan" is written as "3,000 Wu Bai and 64 yuan". These Chinese characters have existed for a long time, and they are used as capital figures and belong to borrowing. The complicated writing of this number was fully used as early as the Tang Dynasty, and then it was gradually standardized as a set of "uppercase numbers".
In the early years of the Ming Dynasty, Zhu Yuanzhang issued a decree because of a major corruption case at that time, clearly requiring that the number of bookkeeping must be changed from "one, two, three, four, five, six, seven, eight, nine, ten, ten and one hundred thousand" to "one, two, three, four, five, six, seven, seven, seven.
Top Ten Capitalists in China?
Number of the top ten capitals in China: one, two, three, four, five, six, seven, eight, nine and ten.
Uppercase numbers are words with the same pronunciation as lowercase numbers. On important occasions, some people rewrite data according to the nature that lowercase numbers are easy to modify, which will bring losses to people. So, people created capitalized numbers.
The amount in Chinese is expressed in words and figures, please fill in in block letters or running script, such as one, two, three, four, five, six, seven, eight, nine, ten, one hundred, thousand, ten million, yuan, angle, minute, zero and whole (positive).
Do not use one, two (two), three, four, five, six, seven, eight, nine, ten, twenty, wool, another (or zero) to fill in, and do not create simplified characters. If the capital figures from one to ten are written in traditional Chinese characters, such as two, earth, billion, ten thousand, circle, etc., it should also be accepted.
Extended data:
The Historical Origin of Chinese Numeral Capitalization
Digital capitalization began in the Ming Dynasty. Zhu Yuanzhang issued a decree because of a major corruption case "Guo Huan case" at that time, in which it was clearly required that the number of bookkeeping must be "one, two, three, four, five, six, seven, eight, nine, ten, ten, ten and thousand".
Change it to traditional Chinese characters such as "one, two, three, four, five, land, seven, eight, nine, pick up, hundred (strange), thousand (money)" to increase the difficulty of altering the account books. Later, "Mo" and "Qian" were rewritten as "Bai and Qian", which have been used ever since.
How to write capital letters from one to ten?
Capitalized one to ten: one, two, three, four, five, six, seven, eight, nine, ten.
Digital capitalization began in the Ming Dynasty. Zhu Yuanzhang issued a decree because of a major corruption case "Guo Huan case" at that time, in which it was clearly required that the number of bookkeeping must be "one, two, three, four, five, six, seven, eight, nine, ten, ten, ten and thousand".
Change it to traditional Chinese characters such as "one, two, three, four, five, land, seven, eight, nine, pick up, hundred (strange), thousand (money)" to increase the difficulty of altering the account books. Later, "Mo" and "Qian" were rewritten as "Bai and Qian", which have been used ever since.
* * * Numbers correspond to capitalized tables:
Extended data:
Precautions for capital figures of RMB:
In Chinese, the number of amount in words should be marked with the word "RMB" before, and the number of amount in words should be followed by the word "RMB" without leaving it blank.
The amount in Chinese is expressed in words and figures, please fill in in block letters or running script, such as one, two, three, four, five, six, seven, eight, nine, ten, one hundred, thousand, ten million, yuan, angle, minute, zero and whole (positive).
Do not use one, two (two), three, four, five, six, seven, eight, nine, ten, twenty, wool, another (or zero) to fill in, and do not create simplified characters. If the capital figures from one to ten are written in traditional Chinese characters, such as two, earth, billion, ten thousand, circle, etc., it should also be accepted.
* * * If there is "0" in lowercase figures, Chinese capitalization shall conform to the Chinese language rules, the composition of figures and the requirements of preventing alteration.
For example, ￥ 206,000.75 should be written as RMB 206,000.75 or RMB 206,000.75.
How to write from one to ten capitals (
1 2345678900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Notes on writing numbers from one to ten: Chinese amount in words numbers should be written in block letters or running script, such as one, two, three, four, five, six, seven, eight, nine, ten, hundred, thousands, ten million, yuan, angle, minute, zero and even (positive). Do not use one, two (two), three, four, five, six, seven, eight, nine, ten, twenty, wool, another (or zero) to fill in, and do not make simplified characters. If the capital figures from one to ten are written in traditional Chinese characters, such as two, earth, billion, ten thousand, circle, etc., it should also be accepted.
1. In Chinese, the number of money is in yuan. After yuan, you should write "whole" (or "positive"), and after corner, you don't have to write "whole" (or "positive").
Two, Chinese amount in words numbers should be marked with the word "RMB", amount in words numbers have "fen", and the word "whole" (or "positive") is not written after "fen".
Three, the amount of words and figures should be followed by the word "RMB" to fill in, and no spaces should be left. If "RMB" is not printed before the number of amount in words, the word "RMB" should be added. The fixed words "thousand, hundred, ten thousand, thousand, hundred, ten thousand, ten thousand, yuan, jiao and fen" shall not be pre-printed in the "amount in words" column of bills and settlement vouchers.
4. When there is "0" in the * * * number, Chinese capitalization shall conform to the Chinese language rules, the composition of the number and the requirements for preventing alteration.
For example, if there is a "0" between 1 and * *, then the word "zero" should be capitalized in Chinese, for example, RMB1409.50 should be written as RMB 6 1409.50.
2. When there are several "0s" in the middle of the * * * number, only one "0s" can be written in the middle of the Chinese amount expressed in words, such as ￥6007. 14, which should be written as RMB 0.70.14 in Qian Lu.
3. * * * * The digits and digits are all "0", or there are several zeros in the middle of the number, and the digits and digits are also "0", but the digits and digits are not "0". You can only write a zero word in the Chinese amount with words, or you can not write the word "zero". If it is RMB1680.32, it should be written as RMB 16800.32, or RMB 16800.32, or RMB 107000.53, or RMB 107000.53.
4. The digital angle of the amount of * * * is "0", but the Chinese amount is not "0", and the word "zero" should be written after the word "yuan". If it is ￥ 16409.02, it is written as RMB sixteen thousand four hundred and nine yuan and two cents; Another example is RMB 325.04, which should be written as RMB 3,250,040.
Example of filling in capital figures from one to ten: The following is a sample of ICBC cheque for reference when filling in capital figures of RMB. Please note that not only the amount of RMB is capitalized, but also the issue date is generally capitalized.
How to write 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 in capital letters?
Capital figures
One, two, three, four, five, six, seven, eight, nine, pick up, hundred, thousand, ten thousand, hundred million, yuan (circle), angle, minute, zero and whole. This is a capital figure that everyone often needs to fill in. Why use capital figures? Presumably many people are not very clear!
Let's take a look at the following two tables about capital figures:
1. Comparison table of numbers and uppercase and lowercase numbers:
Numbers, lowercase numbers, uppercase numbers
0 000
1 yiyi
Uh-huh.
Sansan/Ginseng
4 sisi
Five-five
6 Liu Lu
7 Qiqi
Baba
Jiujiujiu
2. Comparison table of figures in carry and uppercase and lowercase.
Numbers, lowercase numbers, uppercase numbers
10 stone
20 20
3330
100 Bye.
1000 thousand
1000000
100 billion
/kloc-0 1000000000 trillion
/kloc-0 100000000000000000000 Jingjing
10000000000000000000000000000000000000000000000 Shun Shun
From the above two tables, we can see that both * * * numbers (1, 2,3 ...) and so-called Chinese lowercase numbers (1, 2,3 ...) are easy to be altered and tampered with because of their simple strokes. Therefore, the numbers on general documents and commercial financial bills should be capitalized in Chinese characters: one, two, three, four, five, six, seven, eight, nine, ten, one hundred, and one thousand (the strokes of "ten thousand, one hundred, and one trillion" are complicated, and there is little chance of using them, so there is no need to replace them with other words). For example, "3,564 yuan" is written as "3,000 Wu Bai and 64 yuan". These Chinese characters have existed for a long time, and they are used as capital figures and belong to borrowing. The complicated writing of this number was fully used as early as the Tang Dynasty, and then it was gradually standardized as a set of "uppercase numbers".
In the early years of the Ming Dynasty, Zhu Yuanzhang issued a decree because of a major corruption case at that time, clearly requiring that the number of bookkeeping must be changed from "one, two, three, four, five, six, seven, eight, nine, ten, ten and one hundred thousand" to "one, two, three, four, five, six, seven, seven, seven.
The questioner's evaluation of the answer:
I like this. Thank you.
How to write 1- 10 in capital?
Capitalized Chinese characters range from 1 to 10 ":one, two, three, four, five, six, seven, eight, nine and ten.
No matter * * * numbers (1, 2,3 ...) or so-called Chinese lowercase numbers (1, 2,3 ...), they are easy to be altered and tampered with because of their simple strokes. Therefore, the numbers on general documents and commercial financial bills should be capitalized in Chinese characters: one, two, three, four, five, six, seven, eight, nine, ten, one hundred, and one thousand (the strokes of "ten thousand, one hundred, and one trillion" are complicated, and there is little chance of using them, so there is no need to replace them with other words). For example, "3,564 yuan" is written as "3,000 Wu Bai and 64 yuan". These Chinese characters have existed for a long time, and they are used as capital figures and belong to borrowing. The complicated writing of this number was fully used as early as the Tang Dynasty, and then it was gradually standardized as a set of "uppercase numbers".
In the early years of the Ming Dynasty, Zhu Yuanzhang issued a decree because of a major corruption case at that time, clearly requiring that the number of bookkeeping must be changed from "one, two, three, four, five, six, seven, eight, nine, ten, ten and one hundred thousand" to "one, two, three, four, five, six, seven, seven, seven.