Current location - Plastic Surgery and Aesthetics Network - Wedding planning company - How to assemble butterfly lanterns
How to assemble butterfly lanterns
Assembly method of butterfly lantern:

1, first drill a hole in the bottom of the yogurt cup; Cut a golden ribbon and stick a piece of double-sided tape at regular intervals. After the ribbon is pasted with double-sided adhesive, it is wrapped around the yogurt cup and pasted;

2. Wrap thin iron wire around the aluminum can and fix it with transparent tape; Then move the yogurt cups wrapped in ribbons on the wire one by one.

The decoration of the last cup was changed, and a purple ribbon was added to the next cup, because I think the color of the golden ribbon is too light and inconspicuous. There is also a yogurt cup hanging at the bottom of the jar, which is adhered with scotch tape. Throw some nylon rope into the cup at the bottom and tear it into filaments to make silk nails.

4. The lanterns have been basically finished, and the next step is the overall decoration. Tie a bow with a ribbon and stick it on the top of the jar; Tear the nylon belt into thin strips and stick it on the tank with transparent tape for a circle to make it naturally bend and sag;

5. Cut the corrugated wrapping paper into small pieces and stick them on the cans at will to cover the words on the cans; Finally, wrap ribbons around the upper and lower ends of the jar and the whole lantern will be decorated!

How to use double-sided adhesive tape:

1. First, the adhered surface needs to be cleaned and dried. The surface can be rubbed with a mixture of isopropanol and water, and the next step can only be carried out after the surface is completely dry.

2. When the double-sided adhesive is bonded, the force should be uniformly applied from one end to the other, otherwise bubbles will appear. If there are bubbles, they need to be removed.