1, bulb aging or failure
This is one of the most common reasons. If used for a long time, the bulb will gradually age and the brightness will gradually dim. If the projector suddenly darkens during normal use, it may be because the light bulb is damaged by heat, and the light bulb needs to be replaced at this time. Different models of projectors will have different bulbs, so you need to read the instructions carefully or turn on the projector to see relevant information.
2. There is too much dust
If too much dust accumulates on the surface of the filter or lens of the projector, it will darken the picture during projection and affect the brightness. You can use a soft brush and pure water or a special lens cleaner to clean the lens and filter.
3. The screen brightness setting of the display device is incorrect.
If the projector is connected to a computer or mobile phone, you can check whether the brightness of the display screen is set correctly. If the brightness of the device is set too low, it will affect the image brightness of the projector.
4. Ambient brightness problem
The environment with insufficient brightness will affect the experience effect of projector screen. In order to better display the brightness of the picture, you can try to keep the surrounding environment of the projector relatively dark.
5. General
If all the above problems have been eliminated and there is nothing unusual, then the problem may be the projector itself. At this time, you can check and confirm whether there is any technical problem with the projector. If it is a technical problem, it is recommended to contact the after-sales personnel of the manufacturer in time to deal with it.
In short, when the screen brightness of the projector darkens, the possibility of bulb aging or failure should be ruled out first, and at the same time, all parts of the projector should be maintained and maintained, and the screen brightness setting of the display equipment should be checked to keep the ambient brightness as much as possible. If the above operation does not solve the problem, there may be technical problems, which need professional operation to reduce the use risk.