Canopy products can shelter us from the wind and rain in rainy days and create a more comfortable environment, but in sunny days we may prefer to shrink and fold the canopy to enjoy abundant sunshine baptism. Therefore, the most popular product on the market is the folding awning, which can not only meet the daily needs of consumers, but also provide convenient and humanized folding options. They are really excellent tools for word of mouth. Today, Bian Xiao gives several examples of knowledge about installing telescopic awnings for your reference.

A, telescopic canopy installation

Telescopic awning awning is equipped with fixing parts. Drill a hole in the wall or ground where the awning is needed, drive the expansion screw into the hole, put the awning fixture on the expansion screw, and tighten the nut. Then put the awning on the fixing piece and fix it with screws. Attention! The mounting fixture of telescopic canopy with crank arm is usually made of aluminum alloy. If it is installed on a steel frame and welded by electric welding, the installation fixture needs to be customized with an iron fixture.

Second, the outdoor large canopy installation method

1. snap line: according to the elevation of the drawing, the position and size of the solar panel ceiling and the measured center line, the position line of the solar panel ceiling will pop up.

2. Embedded parts: According to the position of the main framework of the sun panel ceiling of the elevation control line, check whether the elevation of the upper surface of the door beam meets the design requirements. If there is any difference, chisel or level with high-strength cement mortar. After reaching the strength, set out the position line of the expansion bolt according to the size of the embedded steel plate in the detailed drawing of the deepening design node, then drill and place the expansion bolt, install the steel plate and fix it with the expansion bolt.

3. Install the main skeleton: according to the position line of the main skeleton on the suspended ceiling of the solar panel.

4. Sub-framework installation: After the main framework of the solar panel ceiling is installed and fixed, install the solar panel ceiling framework, adjust the position, and weld and fix it with the main framework after leveling.

5. Installation of the external sun panel: According to the layout position of the deepening design, prepare the sun panel with appropriate size for installation.

6. Glue and install battens: After comprehensively checking the installation quality of external solar panels, install external solar panels and weather-resistant glue, and then install special aluminum alloy battens.

7. Installation of inner solar panels: According to the position in the drawing, prepare solar panels with appropriate size for installation. During installation, the bottom of the upper solar panel should be wiped clean with a white towel, and the inner solar panel should also be wiped clean before installation, so as to avoid the interlayer pollution that cannot be wiped clean and affect the macro effect.

8. Glue and install battens: After comprehensively checking the installation quality of the inner sunshine board, install the inner sunshine board, weather-resistant glue and special aluminum alloy battens.

9. After all the sun panels are installed, the periphery of the ceiling eaves of the sun panels must also be constructed according to the nodes in the drawings.

There are many styles of retractable awnings on the market, with different classified products, different target groups and different use environments. For example, the products mentioned above are mainly used in ordinary families and large outdoor places. Bian Xiao suggested that you learn the installation knowledge after you know the positioning of the awning you use. And in the actual operation process, it is necessary to prepare suitable tools and parts and analyze them with reference to the advice of professionals in order to solve the problem efficiently.