A small pit costs about 150 to 200.

The process of repairing a car dent is different from painting the body panels.

Generally speaking, there are three factors that affect the price, the size, location and sharpness of the dent.

The price in the white area in the picture is relatively low, the price in the gray area is slightly higher, and the price in the red and black area is relatively high.

Car dent repair is to restore the dented part of the car paint to its original state by hand.

Car dent repair technology can repair more than 90% of dents on undamaged paint surfaces.

If the edge of the car body is dented, it is generally difficult to repair.

The auto repair center will tell you three processing methods: 3360. First, process it by hand.

Use a puller to suck out the pits on the outside of the car body, restore the rough shape and then take out the interior trim.

Use a special crowbar tool to pry out the dent from the inside of the car body, and finally knock it back with a rubber hammer and level it with a leveling light.

The entire process will not cause any damage to the car paint, and the dents in the car body can be repaired without spraying paint.

2. The processing of the machine is to use a denting machine to suck out the recessed part, and then use a rubber hammer to knock it back.

However, this equipment is only suitable for repairing flat pits on the plane of the car body. Serious pits must be dealt with manually.

Third, the above two methods are only suitable for repairing dents in the car paint that are not damaged.

Once the paint surface is damaged, or there are dents that cannot be repaired by the above two methods, it can only be repaired by this traditional body panel painting method.

One million car purchase subsidies