Weighs about 15 tons.

The fuselage and the workbench are cast into one (all-steel fuselage above 100 tons). The slider moves up and down in the guide rail on the fuselage. The gap between the guide rail and the slider is adjusted by the top screw. After adjustment, tighten the caps together. The total weight of some parts is about 15 tons. Not included are many different punch presses.

A punch press is a stamping press. Punch production is mainly for plates. Through the mold, blanking, punching, forming, deep drawing, trimming, fine blanking, shaping, riveting and extrusion parts can be made, etc., which are widely used in various fields.