It can be repaired, which is the traditional girder rectification operation. Restoring the dislocated girder to its original position is called rectification. However, the strength of the renovated girder is definitely not as good as that of the original factory. The car beam can be repaired if it is bent, but it depends on the degree of bending.

Repair of automobile beam after collision and bending;

1, many bends can basically be repaired, but no matter how they are repaired, they can't be repaired, and they will be more or less accompanied by noise. The deformation of the automobile beam, whether serious or not, basically affects the force balance of the vehicle. The deformation of the girder will affect the height of the vehicle, the vehicle will not walk in a straight line, and the tire pressure will be uneven. If it's urgent, a flat tire will happen.

2. Girder deformation may also affect the driver's adjustment of vehicle instability, which is prone to accidents. When the girder is deformed, the girder calibrator must be used to correct it well.

3. You can go to the plastic equipment factory. A good technical repair shop will repair the line. After it is repaired, it will not have much impact on the future. If it can be repaired or used, it is impossible to have no impact at all. The strength of the whole girder will not be as good as before.