Some time ago, I got together with old friends, one of whom had been mixed up in a shoe factory in Dongguan, and revealed some methods to avoid creases in uppers. The following methods have not been practiced by myself and are for reference only.

Step one, wipe the vamp with cotton cloth that is not too wet, on the one hand, clean the vamp, on the other hand, prepare for the following steps;

Step 2, blow the vamp soft with a hair dryer (this step will be better before the vamp has a certain humidity). The purpose is to soften the cortex; The method of the factory is to use steam, which will be better than the ram, but I believe that few families will use steam, right?

Step 3, fill the inner boots with soft newspaper to fix the shoe shape; The newspaper must be as soft as possible before it is inserted. )

Step 4, put the shoes in the refrigerator for about 3 minutes; There is a bag in the back asking which floor to put in the refrigerator: the frozen layer will do.

Step 5: Take out the shoes, put them aside for a while, blow them with a fan, and set them (personally, as long as the newspaper is stuffed big enough in step 3, the wrinkles on the toe will be relatively flat, although there are not many wrinkles on the side of the shoes, it will take more effort);

Step 6: Fill in a new newspaper after plastic surgery, polish your shoes, dry them and put them in a box. ?

In fact, the maintenance of shoes still depends on peacetime. If you only use this method when wrinkles are serious, I believe the effect is not great.

Don't expose your shoes to the sun for maintenance at ordinary times. Let it dry in a ventilated place at night. Oil them often, and they will age slowly. ? ?