First, a small area of water.
1. First dry the water on the floor surface with a dry cloth, and then you can choose a practical vacuum cleaner to absorb the water vapor in the joint gap of the soaked floor or use the cold air file of the hair dryer to dry it.
2. Press some heavy objects on the upturned parts in a small area, and the wooden floor will return to normal by itself after a period of time.
3. If after a while, the joint bulges, but it is too far away from the original floor, you can try to wax the floor, and the waxed floor will be almost the same as the original.
4. If the color, shape and original state of the floor are still very different after waxing, then the floor has to be replaced locally.
Second, the water situation is serious.
Carefully pry up the floor, pile it in a well-ventilated place and dry it in the shade. Use the weight generated by stacking to prevent deformation. Generally, solid wood floors with good quality can be reused.
Third, strengthen floor waterproofing.
1. It is not recommended to pry the laminated floor to dry whether it is flooded in a large area or in a small area, which may easily cause damage to the laminated floor and may lead to serious consequences that it cannot be used again.
2. It is best to drain the surface water of the floor quickly, then take off the skirting line of the floor to expose the expansion joint, and rely on the expansion joint to dissipate the water vapor. However, depending on the water inflow, it usually takes about seven to fifteen days to dry thoroughly.
3. Products with good quality or short soaking time can be recycled by themselves. If/kloc-cannot be recovered after 0/5 days, it should be replaced again.
Therefore, when consumers buy wooden floors, they should be clear about the material of the wooden floors they buy, so that when water enters, it can be effectively treated.