The steps of sticking the explosion-proof membrane on the glass are as follows:

1, clean the inside and outside of the car, drive the car to a clean and dust-free place, etc.;

2. Measure the size of the window. According to the size of the cut film, the size must be appropriate. If you don't master it well, the size can be larger, but not smaller;

3. Clean the window glass. This step is very important, because if there is dust on the glass, even a little will affect the quality of the film.

4. Tear off the film, spray water evenly on the effective film surface, and put the torn plastic film aside for later use. Leave a distance of 5- 10 mm above the glass, stick the surface of the sprinkler film on the automobile glass and fix it, tear off the plastic film and paste it, scrape it flat with a scraper, and finally tear it off.