Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - How to Modify Fei Ying Street Fighter Motorcycle
How to Modify Fei Ying Street Fighter Motorcycle
The configuration parameters of Eagle Street Fighter are reproduced as follows:

1, the first in China, the scaffolding of high-strength steel pipe is as light as alloy frame, which optimizes the rigidity, stability and toughness of the whole vehicle.

2. High-power machine imported, Italian Morini engine, surging power and rapid acceleration.

3, SACHS 4 1mm front shock absorption, providing the best road feeling and comfort.

4. The rear rocker arm is designed with triangular steel tube as an aid to meet the stability of driving on various roads.

5, saxophone forward 19 full adjustable rear shock absorption.

6.320mm super-large diameter, opposite four-piston front brake caliper and 2 15mm rear one-way brake caliper.

7, using aviation brake tubing, small expansion coefficient, corrosion resistance, to ensure maximum braking force.

8. Multi-reflective crystal drilling headlights have strong penetration to ensure the safety of driving at night.

9.LED high-brightness taillights and 2 1W bullet-type turn signals.

10, LCD multifunctional liquid crystal electronic instrument, (functions: speedometer, odometer, oil alarm light, turn signal, high beam, hollow light, oil quantity, clock)

1 1, PE high-performance polymer material, antistatic and flame retardant, 1 10L ultra-large capacity fuel tank, impact-resistant and not easy to deform.

12, built-in stainless steel exhaust pipe of catalytic converter, reaching Euro II standard.

13, design concept of large-displacement sports car, with aluminum alloy ultra-clean muffler in the middle.

14, front1170-17, rear 150/70- 17, with high-performance radial vacuum tires, it has stable grip and is suitable for driving on various complicated roads.

15, three hollow lightweight aluminum alloy integral rims.

16, aluminum alloy integrally forged upper and lower connecting plates.

17, reinforced integral needle bearing steering column, long life and impact resistance.

18, an unprecedented axle with large diameter, light weight and strong load.

19,428 # thickened O-ring sealing chain, durable and maintenance-free.

20. The steering handle is reinforced by the crossbar, which is more stable and stronger.

Sakesix road

engine

Four-stroke SOHC 2 valve

Cylinder diameter x stroke

62x48.6 mm

The displacement is146.7cc.

The maximum power is 9.8 kw (13.14 HP)/9000 rpm.

The maximum torque is 10.0 nm /7000 rpm.

Emission standard euro II

6-speed gearbox.

Main transmission ratio 66/ 19 (3.474)

Secondary transmission ratio

1. Drive 36/ 13 (2.769)

2. Drive 3117 (1.823)

3. Drive 28/20 (1.400)

4. Driver 26/23 (1. 130)

5. Drive 24/26 (0.923)

6. Drive 20/23 (0.869)

Front/rear transmission speed ratio 14: 55

Chain (428 o-ring), part 144.

Use SAE 20/50WE engine oil.

The fuel consumption is 1200 ml.

Start mode electric start

Compression ratio 1 1: 1.

Ignition system CDI

Spark plug champion RG4HC/NGK CR 9E

Cylinder angle 25

Che Shen Shen Shu

measure

Length/width/height 2005/820/1085mm

Battery 12V 8 Ah

Tire front1170-17m/c54htl

Hou 150/70- 17m/c 69 HTL

Front brake system 320 mm opposed four-piston brake caliper

Rear Brake System 215mm Single Piston Brake Caliper

Brake system oil DOT4

The front damping forms are 4 1mm and100 mm.

90 mm stroke of rear shock absorption form

Net weight128.5kg.

The load capacity is 330 kg

Maximum speed > 100 km/h

The width of the handle is 820mm.

The front angle is 64.

Scaffold, steel pipe rack

Cushion height 815mm

Tank capacity 1 1L

If the engine is imported, it should be better than the domestic 150, because it involves the procedures of door-to-door inspection and vehicle inspection, so the engine body can be temporarily unchanged. You can try to modify the circuit part, replace the high-voltage package and high-voltage line, and replace the spark plug. If possible, you can change to a large-caliber carburetor.

After reduction, it should not be difficult to operate the rear fork if the hydraulic nitrogen of KLX or CR is used to assist shock absorption. It can be solved by finding an excellent welder, and it is also feasible to change the inverted fork.