Cigar production should be divided into two main steps. One is a cigar and eggplant heart. After the eggplant heart is rolled out, take it out, press it with a template for about half an hour, and roll it into eggplant clothes. This is a real step, which is explained in detail below.

1, cigar making steps:

(1) Roll up the eggplant heart, tear off the leaves selected for making the eggplant heart by hand, and then wrap the stuffing leaves with bound leaves.

(2) on the board, press it into strips by hand and roll it into shapes.

(3) Start scrolling. Put the packaging leaf into the binding leaf, press it by hand, and hold the torn packaging leaf in your hand. The bound pages are placed on the board.

(4) This is only a preliminary appearance. Now, is it the inside of the cigar that is rolled up or loose? It needs to be pressed in a special template.

(5) "Eggplant skin. Choose a soft and tough eggplant coat and cut off the edges of the leaves with a knife on the board. Using a small knife to roll up the edge of the blade on the board by hand is not conducive to cutting off the rolled-up part, leaving a blade with a suitable shape and smooth edge.

(6) Cut off the redundant part with a knife, and finally.

(7) The most important thing is to roll the eggplant hat. This step needs a little vegetable gum. Apply vegetable gum to the eggplant cap, rotate it slightly to cover the eggplant coat, and then cut off the excess eggplant coat.

(8) Finally, the cigar rolling is finished.