1. The magnetic force of the seal is insufficient.

2. The door shaft is loose and deformed

3. Aging of sealing strip

Solution:

1. Unplug the power plug, open the door, evenly heat the rubber strip at the gap with a hair dryer, shape it by hand while heating, and then cool it.

2. Put the lighted flashlight into the refrigerator, then close the door, carefully observe the sealing ring around the door, and look for the light leakage; Then tear the magnetic sealing ring at the light leakage position, and take some clean cotton to fill the light leakage position of the sealing ring.

3. Remove the refrigerator sealing strip, soak it in hot water, clean it and put it on. In order to keep the sealing strip clean, put it in the slot when there is a slot on the door. It is only magnetic to the refrigerator box, but not to the door.

If not, find the after-sales service center to solve it.