There are three ways to carve the ball in Shishi's mouth: the most primitive processing method is to make the ball in the mouth, and the professional technology is superb. First, draw the outline of the lion's tongue and teeth with a pencil, as well as the inner ball and outer corner of the mouth, and remove the excess stone part with a professional carving tool until the mouth can be long spherical. Then remove the extra parts up and down the ball bit by bit, but slowly. Don't carve a big hole in the stone lion's face until the ball can come down, then polish the ball until it is beautiful, and finally carve out the teeth and tongue carefully, so that the stone lion's ball will be carved. The method is as above. The difference is to pull out the tooth directly, make the ball outside, and then put the ball in. Finally, glue the teeth with stone, and then polish and carve them.

The method is the same as above, but the difference is that the ball is made into a smaller ball, and the teeth are all intact. That is, make the ball small outside and put it in. Finally, the place that can be put in is glued with professional stone, and then processed. Stone lion balls are carved. Lions are made of stone, and it takes a lot of effort to carve the ball into it, without any sticking or spelling, but as long as it is not difficult to carve slowly, as long as the stones around the ball are carefully carved away, it will not hurt the mouth around, let alone the ball. It is important to carve slowly with care, patience and certain skills, and also need some space to imagine, otherwise it is likely to carve a flat ball. Nowadays, many stone lions are made of artificial materials such as cement, which has low cost and of course no artistic value.