1, the door sensor switch is actually a metal plate, which is connected by wires and stabilized on the plastic seat in the lock head, and the lock head is grounded. When replacing, remove the door trim panel first, and then remove the lock head. There should be a plastic cover at the lock head, which can be pried out with special tools. Then you can see that there is a plastic seat with lines in the lock.

2. There is an aluminum bolt on the plastic seat. You can drill out the bolt with a 2.5 mm twist drill, and then replace the metal plate on the shelf.

3. It is suggested that the induction switch be replaced with the original one, which can be bought for tens of dollars. Pay attention to the fact that replacing the door induction switch will inevitably damage some spare parts such as the door frame rubber buckle, so you can order enough similar spare parts online in advance to get ready.