1. First of all, when the cpu is deformed or bent, try to protect the cpu to avoid similar situations.

Secondly, we need to find a very flat place, such as a desk, which is helpful for the recovery of zdcpu. Then, we need such an artifact, that is, the injection needle to make the needle tip smooth.

4. Then, insert the needle hole of the injection needle into the position where the cpu pin needs to be straightened, and straighten the pin. Finally, everyone should pay attention to the fact that the strength should be light and follow the trend as much as possible to avoid suture breakage.

The pin of the cpU slot of the computer motherboard was accidentally bent, and it still works. Many pin angles of Cpu are shielded, which is useless, so it is not needed when docking the motherboard.

However, after the pins of the motherboard are bent, you can gently adjust the pins with tweezers to restore their normal shape. There is no problem and don't worry about using it in practice like this.

2. What should I do if the cpu pin of the motherboard is bent?

1. First of all, when the cpu is deformed or bent, try to protect the cpu to avoid similar situations.

Secondly, we need to find a very flat place, such as a desk, which is helpful for cpu recycling.

Then, we need such an artifact, that is, the injection needle to make the needle tip smooth.

4. Then insert the needle hole of the injection needle into the position of the cpu pin to be straightened, and straighten the pin.

Finally, everyone should pay attention to the fact that the strength should be light and follow the trend as much as possible to avoid suture breakage.

The pin of the cpU slot of the computer motherboard was accidentally bent, and it still works. Many pin angles of Cpu are shielded, which is useless, so it is not needed when docking the motherboard. However, after the pins of the motherboard are bent, you can gently adjust the pins with tweezers to restore their normal shape. There is no problem and don't worry about using it in practice like this.

3. What should I do if the pins on the 3.CPU motherboard bend for the first time?

You can try the following steps:

1. When the cpu is deformed or bent, try to protect the cpu to avoid similar situations. ;

2. You need to find a very flat place, such as a table, which will help the cpu to resume its work.

3. Need an injection needle, and smooth the needle tip of the injection needle.

4. Insert the needle hole of the injection needle into the position of the cpu pin to be straightened, and straighten the pin.

What needs everyone's attention is to be light and follow the trend as much as possible, so as not to cause the suture to break.

If you don't have a good grasp, I suggest you go to the computer city to find a professional to operate it.

4. What if the 4.CPU pin is bent?

You can recover in the following ways:

1. When the cpu is deformed or bent, try to protect the cpu to avoid similar situations.

2. Need to find a very flat place, such as a desk, which is helpful for the recovery of cpu.

3. Need an injection needle, and polish the needle tip of the injection needle smoothly.

4. Insert the needle hole of the injection needle into the position where the cpu pin needs to be straightened, and straighten the pin.

5. It should be noted that the strength should be light, and follow the trend as much as possible, so as not to cause the suture to break.

If you are not familiar with it, the best way is to go to the computer city to find a professional to recover.

5. The pins of the cpU slot of the computer motherboard are unexpectedly bent.

The pin of the cpU slot of the computer motherboard was accidentally bent, and it still works. Many pin angles of Cpu are shielded, which is useless, so it is not needed when docking the motherboard. However, after the pins of the motherboard are bent, you can gently adjust the pins with tweezers to restore their normal shape.

There is no problem and don't worry about using it in practice like this. If something goes wrong, cut a thin copper wire as thick as the cpu pin angle and a little longer.

Just use copper wire for the network cable. Of course, other materials with suitable thickness and hardness can also be used.

Insert the cpu card holder first, and then put the cpu. Adjust the length just to touch the corner of cpu, not too long and not too short. There is no warranty in this case. Because it's trauma.