What if the automatic clothes rack can't be lifted?
1. First, check whether the battery of the remote controller is still charged or not.
If the battery is dead and cannot rise, the battery can be replaced.
2. If there is nothing wrong with the remote controller, you need to check whether the codes of the remote controller and the host computer match successfully. You can press the button on the remote control when the host computer starts up and sends out "di". If a long tone is sounded at this time, the code is successful.
3. You can also check whether the microswitch is out of order. 4. You can also check whether the fuse of the motor and the whole circuit is loose or burnt out.
5. There may be something wrong with the upper and lower ends of the telescopic hanger. You can check whether it can be stretched or not.
6. If all the above attempts are useless, then you need to find a professional to repair it. Can automatic clothes hangers be used in bask in the quilt? Bask in the quilt is generally acceptable, but it depends on the bearing range and height of the automatic clothes rack.
Usually, the small quilt can be dried, and the bigger quilt is easy to fall to the ground. For larger double-layer quilts, you can consider using hand-cranked clothes hangers or intelligent electric clothes hangers. The drying rod is longer and more convenient. Lifting clothes hangers are usually rigid enough not to bend easily, must have good surface treatment ability, and must be durable, bright and dustproof.
At present, lifting clothes hangers are generally protected by plastic sleeves at the head and hooks. The details ensure the safety and service life of the product, and the overall clothes rail is stronger. How to hang clothes is a better underwear?
As our close-fitting clothes. Outdoor sunlight can avoid bacteria and keep it clean. Sunning the coat in reverse can not only sterilize, but also prevent the clothes from fading.
Especially for clothes with bright colors and dark colors, if they are exposed to the sun for a day, the clothes will easily fade and get old, which can be effectively avoided by wearing them in reverse. Dehydrated clothes. Clothes should be dried immediately after washing and dehydration, and clothes placed in the washing machine are prone to wrinkling. In the long run, clothes will easily get old and worn out.
Chemical fiber clothing. Chemical fiber clothes are not easy to deform and wrinkle, and can be dried directly. After washing, just shake it a few times and you can hang it. It's simple and clean.
After dehydration, the sweater should be placed on a net bag, flattened and shaped, then hung on a hanger and dried in a ventilated and cool place. Because the knitting thread of the sweater is not tight, it can prevent deformation.
There is no response when the automatic lifting clothes rack rises and falls.
When you press the remote control of the electric clothes rack, you should first check whether the up light and down light of the remote control are always on. If they are not turned on, there is something wrong with the remote control. If it is turned on, the user frequently operates the remote control, resulting in overheating protection of the motor of the electric clothes rack, and there is no response when it rises or falls. How to solve the problem that the electric clothes rack does not respond 1. When the electric clothes rack does not respond, it may be that the remote controller is not equipped with a battery, the battery is dead, the remote controller is too far away, or even the remote controller has a fault. These situations will actually cause the user to press any button on the remote control without responding. The specific solution is to install a battery and replace the remote control.
2. Because the integrated circuit of the control panel in the electric clothes hanger is out of control, any key in the remote controller will not respond, and the control panel needs to be repaired or replaced.
3. In the case of signal and receiving sound, it is likely that the two wire ropes of the electric clothes hanger are not tightened, the actual weight of the clothes drying rod has exceeded the load, and the fuse is blown, which leads to the inability to lift. At this time, it can be solved by tightening the wire rope or reducing the actual load and replacing the fuse.