The installation method of the front part of children's bicycle is as follows:
1. There is a small iron plate under the handle. Loosen the screws slightly, so that the small iron plate is flush with the vertical plate, and the small iron plate will not fall off.
2. Then insert the small iron sheet and the riser vertically into the front of the car, put them in a suitable position, tap them gently, and then tighten the screws on the riser with a wrench.
3. Next, install the handlebar. Remove the screws and install the handlebars. When installing, fix it with one hand, aim the screw at the hole with the other hand, and then put it in and tighten it.
4. After installation, check whether the screws are loose. If it is loose, be sure to tighten it, otherwise it will be more dangerous for the child to ride.
The above installation methods for the front of children's bicycles are for your reference only. Of course, there are some differences in the front installation of different brands of children's bicycles, but the general steps are similar and relatively simple. If you feel that your installation is troublesome, you can also ask the merchant to help you install it and take it home.