1. Use ready-made rings suitable for wearing to compare and determine the size of Tiffany rings. You can compare the inner ring you are wearing with the lower ring. If you can only see the white circle in the inner ring of the ring, but you can't see the blue part, it means that the ring matches the size of the mark. If the size of the inner ring of the ring is between two sizes, it is recommended to choose a larger size.
2. Measure with Tiffany's special measuring ruler. Cut the measuring ruler below and cut a hole along the dotted line. Pass one end of the scale bar through the opening, wrap the measuring ruler around the root of the finger, and pull the tapered end outward. The scale corresponding to the horizontal opening is the size of the ring. In order to ensure that the ring is more suitable, it is recommended to measure the finger joints at the same time. In addition, the size of the ring should not be too tight or too wide, depending on personal feelings.
3. In addition, you can also measure your finger circumference and compare it with the related size comparison table to find out the Tiffany ring size you are suitable for wearing. The method is as follows: firstly, wrap an elastic string around the root of the finger, draw a line at the intersection of the string with a pen, measure the distance between the two marks with a ruler, and then compare the length of the marks with Tiffany's ring size table to get the appropriate ring number:
Can Tiffany's ring size be changed?
Tiffany ring size modification, Tiffany ring can be modified free of charge in China within three months from the date of purchase, even if it is bought abroad. You can only change it, not change it.
1, gold addition method
Cut off the ring holder, add a piece of metal with the same material to the ring tory, weld it to the ring tory, then polish it, and then electroplate it if necessary.
2. Support Dafa
Put the ring on a special expansion tool and force it to exceed half a size, thus changing the size of the ring.
3. Golden cutting method
The size of the ring can be reduced by dropping a section of Toche, then welding, polishing and electroplating.
4, washer method
A washer made of the same metal material as the ring holder is embedded in the inner wall of the ring holder, so that the size of the ring can be reduced. Tiffany Jewelry Product Series >; & gt