1. Cleaning: First, thoroughly clean the car surface, remove dust and sundries, and determine the maintenance process.
2. Oiling: Oiling the place to be painted.
3, grinding: choose the right sandpaper to grind the parts that need painting, and be sure to smooth all the paint.
4. Scraping putty: When the paint is completely worn off, you can scrape it with putty. Use sandpaper to smooth the putty. After the putty is leveled, polish the old coating around the putty with P360 sandpaper.
5. Cleaning the shelter: after the putty is scraped, blow off the dust and impurities on the surface with an air gun, then clean the area around the putty with a degreasing agent, and finally cover the area to be painted with a newspaper to prevent the paint from splashing.
6. Painting: At this time, you can spray the paint that has been debugged in advance. Be careful not to get too close or too far. Painting can be done in 3-5 times.
7. Finishing: After the paint is finished and dried, the uneven places should be polished and trimmed to make them natural.
Hope to adopt, thank you!