How to get rid of static electricity on a sweater There is a clever trick to get rid of static electricity on a sweater. If the sweater can be washed, you can use softener under static electricity to restore the soft texture of the clothes as much as possible.
1, according to the normal dosage, pour the laundry detergent into water for dilution, soak it in the laundry detergent for 20 minutes and then rinse it off;
2. When rinsing for the last time, add softener and soak for 3 minutes. After soaking, you can directly wring out the clothes to dry.
※ Warm tip:
(1) For the last rinse, no water is needed after use;
② When the washing machine has a special injection port, just pour a proper amount of this product into the "softener injection port";
(3) When there is no special entrance for hand washing or washing machine, dilute this product with clear water and stir it evenly, then soak it in the washed clothes for 3 minutes, and then take it out to dry.
How to eliminate static electricity on sweaters? Please put the gold spinning into the water and spray dry the front and back of the sweater with a watering can to eliminate static electricity.
Use commercially available fabric softener. Washing with this thing can reduce static electricity. When the human body is moving, the panel rubs against the clothes, and the clothes rub against each other, which will generate static electricity. With the increase of household appliances and the increase of people wearing chemical fiber clothes in winter, the electrostatic charges generated by household appliances will be absorbed and accumulated by the human body. In addition, the walls and floors of the room are mostly insulators, and the air is dry, which is more susceptible to electrostatic interference. In order to prevent the occurrence of static electricity, it is necessary to maintain a certain humidity indoors, often mop the floor, often sprinkle water, or humidify with a humidifier; Take a bath and change clothes frequently to eliminate the static charge accumulated on the surface of human body. When you find that your hair can't be combed, soak the comb in water for a while, and then comb your hair after the static electricity is eliminated. After taking off your clothes, gently touch the wall with your hands, and touch the wall with your hands before touching the door handle or faucet to "discharge" the static electricity in your body, so as not to hurt you. For the elderly, we should choose soft and smooth cotton textiles or silk underwear, and try our best to reduce the harm of static electricity. 1, wash your hands before going out, or put your hands on the wall to remove static electricity, and try to * * * chemical fiber clothes. 2. In order to avoid electrostatic strike, you can use small metal devices (such as keys) and cotton cloth to touch doors, door handles, faucets, chair backs, bed railings, etc. To eliminate static electricity, and then touch them with your hands. 3. Wear cotton underwear. When you are ready to get off, hold the gear with your right hand, then touch the iron part below with your fingers, then open the door, put your left hand on the iron part of the door, but don't let go of your left hand, then let go of your right hand and get off. At this time, if you hold the door with your right hand, you won't be electrocuted. Then hard pass, get ~~ 5. When dealing with static electricity, we can pay attention to both "prevention" and "discharge". "Prevention", we should try to choose pure cotton products as fabrics for clothes and home decoration, and try to avoid using chemical fiber carpets and furniture with plastic as surface materials to prevent friction and electrification. Try to stay away from TV, refrigerator and other electrical appliances to prevent induction electrification. "Discharge" is to increase the humidity and make the static electricity in the area easy to release. When you turn off the TV and leave the computer, you should wash your hands and face immediately, so that the electrostatic charge on the surface of the panel can be released in water. Try to choose high moisturizing cosmetics in winter. Commonly used humidifier. Some people like to keep ornamental fish and daffodils indoors, which is also a good way to adjust indoor humidity. In addition, an economical and practical humidification method is recommended: put a basin of water under the heating, use an old towel (or absorbent cloth), put one end in the water and the other end on the heating, so that about three liters of water can be evaporated into the house day and night. If every heater does this, the whole room will feel damp and pleasant. it wont hurt you to try it 6. Bathing and changing clothes frequently can effectively eliminate the static electricity accumulated on the surface of human body.
Why does the sweater get static electricity and how to eliminate it? Hello! Sweaters have static electricity. Appropriate softener can be added in the last washing to make the clothes more supple and reduce static electricity.
Please check the label of woolen goods before cleaning. If the sweater can be washed with water, please clean it in the following ways.
1. Dust before washing, and then soak in cold water 10-20 minutes (wool fabric will shrink and deform in water solution above 30 degrees, so it should be soaked in cold water for a short time);
2. Then gently rub the clothes with silk cotton cleaning liquid or laundry detergent in the water. Don't rub them hard. If you want to machine wash, choose light gear (the washing temperature should not exceed 40 degrees);
3. Rinse with clear water, take it out and squeeze it dry.
note:
1, dry cleaning is recommended for sweaters;
2. Sweaters are not alkali-resistant. If it is washed with water, use a neutral detergent without enzyme, preferably a special detergent for wool. If you use a washing machine, you should use a drum washing machine and choose a soft program. If you wash it by hand, it is best to rub it gently, not with a washboard.
3. Do not use chlorine-containing bleaching solution for sweaters, but use oxygen-containing bleaching solution; Squeeze and wash, avoid wringing, squeeze out water, spread it evenly and dry it in the shade or fold it in the shade; Wet plastic surgery or semi-dry plastic surgery can remove wrinkles and avoid sun exposure; Softening agents should be used to maintain soft hand feel and antistatic properties. Dark colors generally fade easily and should be washed separately.
How to eliminate burrs in PCB wiring;
In fact, most of the burrs are caused by the fine resolution of the time scale when drawing. In other words, the picture is not big enough. This makes it difficult to see clearly when painting. Of course, it is also possible that the drawing is too zero, especially when the line is drawn, that is, the drawing is not in place at once, so you have to make up the pen. Often make up drawings, and often delete unsatisfactory places. It is difficult to ensure that burrs are not generated. If you want to solve it, it is actually a very simple solution. Just do two things:
First, develop good painting habits. Try not to add stroke lines. If it is short, it is necessary to delete the redrawing, so that one step is in place. Generally speaking, don't use patching.
The second is remedial measures. After drawing the picture, try to enlarge it and look at it carefully, so that the drawn picture is absolutely free of burrs.
The concept of burr
Burr is actually a term of metal casting, milling and electroplating.
Burr's English name is veining. Generally, there are chips and microscopic metal particles on the surface of metal parts, which are called burrs. The more burrs, the lower the quality standard. Therefore, enterprises will try to reduce burrs when producing products.
One of the surface defects of steel is uneven flash at the end of cold-cut, hot-saw or flame-cut steel, and excessive metal is extruded at the weld when welding pipes. The thickness of burr at the end of cold-cut products depends on the gap between blades. General products are allowed to have a certain height of burr; But the inner and outer burrs of welded pipe must be scraped off.
Causes of burr formation
There are many reasons for burr, mainly in the following aspects.
The cut blade becomes dull and the gap is too large; The saw blade is slow or improperly installed;
The punch is worn or improperly installed;
Improper flame cutting operation;
The welding system is not standardized.
Harm of PCB burr
The main harm of printed circuit board burr is to reduce the product quality and make the product unsightly. At the same time, it also weakens the intensity of signal emission, reduces the transmission distance, easily causes signal interference, reduces the mechanical strength and is easy to fall off.
How to eliminate the itching of sweaters? Cut off the pilling with the wool ball shears, and add the softener for the last time when washing.
And even if you don't wear it, some people will be allergic.
How to remove the wool ball is very simple. Taobao has the kind of small machine that makes wool balls! About twenty or thirty yuan. It's battery powered. It's good to get rid of the hairballs. If the clothes are stained with Mao Mao, a very simple way is to stick that big piece of scotch tape and tear it off, and Mao Mao will follow! It works every time!
How to completely eliminate pores is impossible. But can be minimized.
Estee Lauder Perfectly Fine Pore Essence/Fine Repair Essence
Instantly shrink pores to 1/3.
In just 4 weeks, the pores have shrunk by 69%.
Repair uneven skin, delicate and rough skin.
You will fall in love with the silky and seamless satin brought by the product at the moment of friction.
The skin is fresher and more shiny.
Full and even complexion
How to remove the pungent smell of sweaters? Method for removing peculiar smell of clothes
1, which can be treated with salt. Because salt can sterilize and prevent cotton cloth from fading, it must be soaked in salt water before wearing new clothes.
2. After taking a shower, hang the smelly clothes in the bathroom and close the door. You can take it out the next morning, and the clothes will have no taste at all.
3. Adsorption of odor with activated carbon.
4, usually take out clothes to dry will remove the smell of the cabinet, do not spray perfume, because perfume will reflect the smell, it will become more smelly. Or take clothes to a windy place and blow them before putting them on, which will reduce the odor.
5, the washed clothes are not dried, and there is often an unpleasant musty smell. You can add two spoonfuls of white vinegar and half a bag of milk to the clean water in the laundry basin, soak the clothes in this specially prepared laundry water 10 minute, let the vinegar and milk absorb the musty smell on the clothes, then rinse, wash, rub and knead, and finally rinse with clean water, and the musty smell will be gone.
If you are in a hurry to go out, it is too late to get rid of the musty smell in this way. You can also try to remove the musty smell with a hair dryer: hang up the clothes, set the hair dryer at the cold wind, and blow 10 ~ 15 minutes against the clothes, so that the strong wind can take away the musty smell of the clothes, and then you can safely wear them out.