What should I pay attention to when cutting aloe? Problems needing attention in aloe cutting are:
① The cutting substrate should be loose and breathable, and there should not be too much fertility. River sand, vermiculite and perlite are better.
(2) Aloe cuttings should be cut after the wound is slightly dry, and cannot be cut directly.
(3) After insertion, water it in time. After that, you can spray it once a day and stop taking the medicine after one week. If the cutting substrate is not completely dried, don't water it again. Don't always let the substrate get wet.
④ The cutting environment should be semi-cool, not in direct sunlight or in a cool place, otherwise it is not conducive to rooting. ⑤ The suitable temperature is about 25℃, not higher than 30℃ or lower than 20℃, otherwise it is not conducive to rooting.
Pay attention when cutting incense, and try not to cut it when it is hot, because it will produce bacteria when it is too hot. Pay attention to water control when cutting, too much water is easy to rot.
What should I pay attention to when cutting peony and chlorophytum? Chlorophytum peony is a plant with strong adaptability to the environment and strong vitality. Therefore, the requirements for soil matrix are not high. What soil can be used directly at home? Of course, you can also mix some soil containing organic fertilizer to raise it. For example, mixed soil such as soil, perlite and pebbles is also a good choice.
Pay attention to what the newly cut rose branches are. It is best to cut in perlite, which is loose, breathable and permeable. Rose cuttings in perlite are easy to take root and rot.
Pay attention to the newly cut rose branches when cutting them:
? The length of cuttings is 10 cm, and there is at least one bud. This sample is nutritious and can take root and sprout.
? Humidity, water roses in time after cutting, pay attention to maintain a certain humidity of the substrate in the future, and it is better to spray water frequently to increase humidity.
? Illumination, after cutting, you don't need strong illumination, just scatter light, pay attention to shading, don't need direct sunlight, and put it in a bright place indoors.
? In the rooting period, it takes about one month to take root and sprout, and two or three new leaves can be transplanted. It is best to plant them in culture soil. After planting, water it in time and plant it slowly indoors. After two weeks, they can be maintained again. You can add some nutrient solution every time you water it, and the plants will grow better and more vigorously.
How to cut the winter jasmine? What should I pay attention to? Jasminum nudiflorum cutting
Cutting, also known as cutting, is a common propagation method for cultivating plants. Stems, leaves, roots, buds, etc. Some plants can be cut off (called cuttings in gardening), or inserted into soil, sand, or soaked in water, and can be planted after taking root, making it an independent new plant. In agricultural and forestry production, different plants have different requirements for cutting conditions. Only by understanding and adapting to their needs can we achieve a higher reproductive success rate.
Shoots are cuttings with leaves during the growing period of plants (the most suitable in rainy season). Select the semi-mature branches of the year as cuttings, the length is generally about 10 cm, and each cutting belt is guaranteed to have two or three leaves, so as to make nutrients through photosynthesis and promote rooting. If the blades are large, only one blade can be left or a part of the blades can be cut off to reduce evaporation. It is best to choose the stem tip of the tender branches of herbs, which can greatly improve the survival rate and quickly obtain the ideal plant type. Cutting of purple-backed sunflower belongs to softwood cutting.
Water insertion method is to soak the base of cuttings in water, change the water regularly, and transplant them into the soil after rooting. The stems and leaves of watercress green can be inserted in water.
In order to ensure the survival of cutting, we must pay attention to the following key issues:
1. Selection and treatment of cuttings. Choose strong branches without pests and diseases as cuttings. After selecting cuttings, handle them carefully. The tender cuttings should be cut immediately after harvest to prevent wilting from affecting survival. Succulent plants (such as cacti). ) should be cut and put in a ventilated place to dry for a few days, and then cut when the incision is slightly dry; Or barbecue the incision slightly with a small fire to prevent decay. Generally, if the lower incision of plant cuttings is stained with some freshly burned plant ash, it can also prevent rot.
2. temperature. Generally, the cuttings of plants take root fastest at 20 ~ 25℃. If the temperature is too low, it will take root slowly, and if the temperature is too high, it will easily cause cuttings to rot. Therefore, if the temperature is artificially controlled, cutting can be carried out all year round. Under natural conditions, the temperature is suitable in spring and autumn.
3. Humidity. Care should be taken to keep the cutting substrate moist after cutting, but it should not be too wet, otherwise it will cause rot. At the same time, we should also pay attention to the humidity of the air, which can be maintained by covering it with plastic film, but we should pay attention to ventilation for a certain period of time.
Do you need watering to cut the green radish? Pay attention to what green radish needs watering. When cutting sand or perlite, it is best to spray water frequently to increase humidity. Generally, it takes about a month to take root and survive.
What should we pay attention to when cutting Xiong Haizi? Many meat lovers say that the cutting in Xiong Haizi is too difficult, and the budding rate is almost zero. Is it really difficult or is your method wrong? How does Xiong Haizi survive by cutting?
Cuttage preparation of bear leaves
It is very important to plant soil with leaves, and the air permeability must be good. Appropriate amount of perlite and humus should be added to the soil dug directly from the outside to increase the permeability of the soil.
Prepare a container for inserting leaves. If there are many disposable leaves, you can choose a larger flowerpot, one or two leaves, or you can put them in the gap of other flowerpots and transplant them after the seedlings grow.
Leaf insertion method of tung tree
1. Cut off the middle part of the branch of Xiong Tongzi.
2. Separate the branches from the middle and dry them.
3. Then just stick it in the soil like an ordinary leaf plug.
4. Let the leaves grow in a small pot for a period of time, then send out small buds, and then move them to the pot when they are really mature.
Maintenance of Jatropha curcas leaves after cutting
In fact, bear boy leaves are really not difficult, but the survival rate of lazy cutting is higher. Don't play with water at both ends for three days. After cutting, pour enough water and put it in a bright and ventilated place.
If it is found that the buds grow first, it means that Xiong Haizi is in the growing period, so it is easier to cut them. After a period of time, the roots will grow slowly by watering in a pot, which will naturally sprout.
Is the survival rate of rose cutting high? What should I pay attention to when cutting and how to maintain it? Pruning is an indispensable and important process in rose landscaping. If it is not trimmed properly, it will grow into a pile of thorns and be uneven, which will not only cause many pests and diseases, but also be unsightly. Generally speaking, adult plants are pruned once a year in spring before germination. The pruning amount should be moderate. Generally, the main branch (main vine) can be kept within 1.5m, and the rest can be cut off. It is enough to leave 3 ~ 5 buds at the base of each lateral branch. At the same time, thinning dead branches, weak branches, pests and diseases, cutting off branches that are too old and too dense, promoting the germination of new branches and constantly updating old plants can flourish every year. The longer plants grow, the more flowers they bloom, and the more nutrients they need. Every winter, it is necessary to fertilize the soil 1 time to keep the shoots and buds lush and beautiful. Cultivate potted flowers and pay more attention to pruning and shaping. Because of the large flower yield, cut flowers need to be fertilized 1~2 times a week in flower season. Pay attention to cultivating mother branches and cutting off buds on weak branches.
What should I pay attention to when cutting mulberry green branches? 1) The cutting period is the 5th instar of spring silkworm. 2) The nutrition bowl can be made into a barrel-shaped nutrition bowl with plastic film and yellow sand as matrix. 3) Set the seedbed in a place with high terrain, flat, abundant sunshine and close to water source, with the bed width of1.2m ... 4) Cut the cuttings from the base of the new shoot, and pay attention to the swollen heel part to facilitate healing and rooting. Cut off the tip of the new shoot before cutting, and the cutting length is about 15 cm. Leave half a piece of mulberry leaf at the top, cut at both ends of the base and reach the xylem directly. 5) Cutting Insert the cutting into the seedbed in the morning or evening with a depth of 4-5cm.