Internal factors: mainly laser frequency, laser spot pattern and beam divergence angle, laser power, reasonable optical shaping and auxiliary gases and substances in the processing. Attention should be paid to the internal factors in the early stage of type selection, and the purchase should be made according to the opinions of technical engineers.

The factors that should be paid attention to during processing are mainly marking density, marking width, marking depth and laser spot size. Let's talk about it in detail:

1. With the same width, the same spot and the same depth, the higher the marking density, the slower the corresponding marking speed, because the density directly increases the marking area.

2. Marking format As the deflection area of the large-format marking galvanometer increases, the marking speed of the large-format marking is slower than that of the small-format marking.

3. Laser laser engraving depth According to the demand, if it is necessary to deepen the marking depth, it is necessary to adjust the parameters of the fiber laser laser engraving machine and increase the power and current of the fiber laser laser engraving machine, which will affect the marking speed in these processes.

4. The smaller the laser spot size, the smaller the marking volume. Therefore, the bigger the spot, the faster the marking speed.

The above are the skills and precautions for Xiong Hui Electronic Laser Engraving Factory to improve the marking speed. I believe that following these methods can improve the speed of marking papers and create higher benefits.