Telephone line, radio and television, routing principle is the same, (in fact, radio and television is simpler, radio and television network principle is like a big internet cafe), you should be able to get it according to this setting. I hope you can solve this problem as soon as possible.

Since Mercury and TPLINK are products of the same manufacturer, I will send you a copy of TP for your reference.

Hello, for the problem you mentioned, I suggest that you can do this: first connect the telephone line to the modem, and then connect the network cable of the modem to the WAN port of the router. Note that one network cable is not enough, so you need to buy another one, and then connect the second network cable of the router's LAN port to the computer's network card, thus completing the wiring work, and then switch to the router configuration.

First of all, the settings on this machine

1, you should click "My Network Places" on the desktop, then select Properties, then find your local connection, and then click Properties in reverse.

2. In the pop-up window of local connection properties, in the General tab, there is a "This connection uses the following items", where you can find and double-click "Internet? Agreement? TCP/IP. And change the IP inside to192.168.1.2. You don't need to fill in the subnet mask. Click it manually, and it will be automatically filled in as 255.255.255.0. The gateway is the IP address of your router,192.5438+068.438+0.438+0. (of course, it may be a little troublesome to fill in this way. If you want to be more convenient, you can choose that both IP and DNS are automatic, because the router will automatically assign addresses by default. ). Then click OK all the time to finish the setup of this machine.

Second, the router settings

3. Open IE browser, enter192.168.1.1in the address bar, and then press enter. At this time, you will be prompted to enter your user name and password, and then enter admin as the user name and password, and you can enter the routing management interface. (

4. After entering, the system will automatically prompt you to configure the setup wizard. At this time, you click Next, and then you can choose according to your actual situation until you see that there are online ways for you to choose. Usually the ADSL used at home is PPPOE, you choose PPPOE.

5. Prompt for your ADSL account and password. Click Next or Confirm to complete the configuration.

6。 Ok, click Save.

7? Find the DHCP server, turn on DHCP, remember to turn it on.

8.？ Save it again.

9。 On another computer, you can surf the Internet by following the steps in one, but the IP can't be the same.

There is a set of pictures, but I didn't make them. You can have a look!

(Thanks to the brothers who provided pictures here)