First of all, observe whether the displacement of your door is serious. If not, try to fine-tune it yourself. If it is serious, you can find special tools to deal with it if you know where the problem is. If you can't handle it yourself, you can go to a special garage to repair it. If the car is still under warranty, you can go to the 4s shop you bought for maintenance.

Debugging method of door displacement:

Tighten the tapping screw with a screwdriver at a distance of about 3 mm. Close the door and try to seal it. If the door is too loose, screw the tapping screw outward.

If you can tilt slightly in the direction of opening the door when screwing and knocking, the door will be very easy to close and not easy to be blown open by the wind. Be careful not to drill too deep when using a screwdriver, otherwise the steel ball will not work.