1, emerald gourd bracelet can weave cross knots, flat knots and diamond knots. The cross knot is played by arranging three rings in a cross shape, and winding the rings and rope ends tightly to hang jade gourd. Hanging on the financial position at home.
2. First, put on the rope and touch the rope with fire to make it pass through the hole of jade jewelry. Leave a suitable binding length according to personal preference. Open the end of the rope, and then tie a knot around the rope left in the last step with two ropes.
3. Burn both ends of the rope into a wire drawing shape with a lighter. Pass both ends of the rope through the pendant ornament at the same time. It depends. Put the other end for a while.
4. Prepare 1 jade safety buckle and 1 pendant rope. Pass the pendant rope through the small hole in the middle of the safety buckle. Pass the other end of the rope through this ring. After passing through, twist the upper circle and turn it around. Thread the other end of the rope through the new loop.
5. First, the first step is to prepare a small gourd, as shown in the figure below. Step 2, cut off the top of the gourd with a knife, as shown in the figure below. Use a file to polish the top of the gourd, as shown in the figure below. Use tools to make a hole in the top of the gourd, as shown in the figure below.
How to wear a pendant on an emerald bead chain?
1. Prepare all kinds of tools for wearing jade pendant, including lighters, scissors, and most importantly, red rope and jade pendant. Bake the red rope with a lighter, melt it while it is hot, and pinch it with your fingers for easy puncture. Thread the two wires at the end of the red rope into the perforation of the pendant.
2. First of all, the pendant should be separated from the beads: when matching the jade bead chain pendant, pay attention to separating the beads. Because of the high hardness of jadeite, the separation of beads can effectively reduce wear; Protect the pendant. Secondly, the shape is unified, highlighting the main body: a jade bead chain should be well matched, the choice is very important, and the balance is also very important.
3, jade bead necklace can be wound into a circle, is the most classic way to wear, simple and classic style will be slightly grand, so it is best to wear it on formal occasions.
4, jade bead necklace can be wound into a circle is the most classic way to wear, simple and classic style will be slightly grand, so it is best to wear it on formal occasions.
5. Choose the jade bead chain that suits you according to your age. In fact, like jade bracelets, jade bead chains need to be worn according to your age. For example, young women's beads are bright and delicate, while older women's beads are darker.
How to tie the rope of the jade pendant?
Roast the rope with fire, pinch it while it is hot, and let it pass through the hole. Then pass both ends of the rope through the hole of the hook together. Leave an appropriate binding length, such as 1cm. Then open one end of the rope and tie a knot at the other end. Then tie a knot on the other side. Then reverse the knot.
First, prepare the following tools: scissors, lighters and lanyards. Ok, the tools are ready, and we can start.
Roast the rope with fire, pinch it while it is hot, and let it pass through the hole. The rope ends pass through the pendant hole together (a soft cloth can be placed under the pendant to prevent the pendant from being damaged). Leave an appropriate length for personal hobbies. Open one end of the rope and tie a knot at the other end. Then tie a knot on the other side.
Prepare pendant, braided rope and other materials, thread the rope through the pendant, and then tie the rope. Hold the hanging rope in your hand and wrap it around your finger twice.
First of all, we should prepare all kinds of tools for wearing jade pendants, including lighters, scissors, and the most important red rope, jade pendants. Bake the red rope with a lighter, and pinch it with your fingers when it melts to facilitate perforation. Thread the two wires at the end of the red rope into the perforation of the pendant.
How to Knot a Jade Buddha Pendant How to Knot a Jade Buddha Pendant
Burn both ends of the rope into a wire drawing shape with a lighter. Pass both ends of the rope through the pendant ornament at the same time. It depends. Put the other end for a while.
Roast the rope with fire first, pinch it while it is hot, and let it pass through the hole. The rope ends pass through the pendant holes together. According to personal preference, set aside a binding length of appropriate length, such as 1cm. 4. Open one end of the rope and tie a knot at the other end. 5. Go around and tie a knot on the other side.
Burn the ends of the two ropes on the rope with a torch, pinch the ropes together while they are hot, smooth them and let them pass through the hole of the jade pendant. Pass the burnt rope end through the hole of the jade pendant. Leave a suitable binding length according to personal preference.
The tying rope of the jade pendant is divided into three steps: baking the rope, knotting it repeatedly, and handling the end. First, heat the two ends of the two ropes with fire, pinch the ropes together while they are hot, and then pass through the hole of the jade pendant. Leave a suitable binding length.
Roast the rope with fire, pinch it while it is hot, and let it pass through the hole. Then pass both ends of the rope through the hole of the hook together. Leave an appropriate binding length, such as 1cm. Then open one end of the rope and tie a knot at the other end. Then tie a knot on the other side. Then reverse the knot.