Single cylinder washing machine

Laundry features: pulsator structure,

It saves the trouble of manual hand washing, especially cheap!

disadvantages: time-consuming, power-consuming, water-consuming, no spin-drying function, which can not effectively save manpower.

suitable for washing clothes: sheets, quilts, curtains, single clothes and trousers worn in spring and autumn and winter, etc.

at present, this kind of washing machine has been eliminated, so I won't say more here.

Double-cylinder washing machine

Laundry features: the spin-drying function is added, which greatly saves manpower. Compared with automatic washing machine, it is still much cheaper. If you rent a house outside by yourself, this cheap guy with a few hundred dollars is not necessarily inappropriate.

disadvantages: time-consuming, power-consuming, noise and poor water saving.

suitable for washing clothes: sheets, quilts, curtains and daily clothes all year round.

since p>1995, the washing machine market has been dominated by single-cylinder automatic washing machines. However, with the continuous development of the functions and brands of washing machines, there are still some people who have a special liking for double-cylinder washing machines (such as my mother …). So what is the reason? Some consumers think that the automatic washing machine is not durable, and it is difficult to repair if it is broken, and some consumers think that the automatic washing machine is not clean. However, as the second-generation improved washing machine, the double-cylinder washing machine still can't save manpower despite adding the spin-drying function-after washing, the spin-drying function must be done manually, and the spin-drying is often incomplete, and the spin-drying machine often breaks down. In addition, the space of the washing tub of the double-cylinder washing machine is limited, and heavy clothes worn in autumn and winter are not easy to wash.

Here, we would like to introduce you to the matters needing attention when using the double-cylinder washing machine:

1. After washing, it is best to dehydrate for .5-1 minute before rinsing, so as to get rid of the washing liquid and dirt, so as to improve the rinsing effect and reduce the rinsing water consumption.

2. When putting clothes into the dehydration barrel, clothes with large water absorption and thick texture should be placed at the bottom of the dehydration barrel, and thin clothes should be placed on it.

3. Do not put the clothes off-center, so as to prevent the dehydration barrel from shaking due to eccentricity and knocking on the barrel wall.

4. The dehydration time should not be too long, and it should be within 2 minutes each time.

5. after the dehydration, open the outer cover of the dehydration barrel when the dehydration barrel stops rotating, and do not use too much force to avoid breaking the hinge of the cover plate.

6. For the washing machine with spray rinsing function, since both rinsing and dehydration are carried out in the dehydration barrel, the cover should be covered after the clothes are put away, and the rinsing and dehydration timers should be turned to the required spray rinsing time before turning on the faucet; After rinsing is finished (usually 3-4 minutes), turn off the faucet, and then rotate the spray and dehydration timer counterclockwise to dehydrate.

Automatic pulsator washing machine

Laundry features: microcomputer controls laundry and spin-drying functions, saving time and effort.

Disadvantages: electricity consumption, water consumption, easy winding of clothes, poor cleanliness, and relatively expensive.

suitable for washing clothes: all clothes except those that need special washing.

Compared with the first two washing machines, the invention of automatic washing machine is a major revolution in washing machine technology, and the washing program designed by designers makes this washing machine more intelligent. It not only greatly saves manpower, but also further expands the scope of machine washing clothes. Down jackets, duvets and cotton-padded jacket with strong fabrics can save the trouble of hand washing and the cost of sending them to the laundry for dry cleaning. When using automatic washing machine to wash clothes, you can choose the strength of water flow, the length of time and the amount of water on the microcomputer control panel according to the texture and volume of clothes. Therefore, since its inception, automatic washing machines have always been favored by consumers.

in addition, the demand of urban consumers for water-saving washing machines is becoming more and more obvious. So brands like Rongshida launched a series of washing machines such as "Water Bank" in due course, and designed the water recycling function of washing machines from the perspective of making full use of water resources.

it should be noted that the harmonious development of "washing" and "water saving" cannot be ignored while paying attention to the water saving effect of washing machines. According to the survey data of consumers, more than 85% of consumers who expect to buy washing machines think that washing machines should return to their original position and solve the problem of "washing" first. Take Rongshida "Water Bank" series washing machines as an example. Through the combination of "one bucket clean" water-saving technology, non-porous inner bucket water-saving technology, three-stage washing water-saving technology, spray rinsing water-saving technology and concave double-layer S-impeller technology, Rongshida "Water Bank" series washing machines can save water by 4% compared with previous ordinary washing machines, and at the same time, the cleanliness is improved by 35%.

However, because the cylinder of automatic washing machine is still dominated by pulsator, it is easy to get entangled after clothes are dried, and clothes such as wool and silk can't be washed with this washing machine. In addition, this kind of washing machine wears clothes more than other washing machines.

drum washing machine

washing features: microcomputer controls all functions? Good cleanliness, clothes without entanglement.

Disadvantages: Time-consuming, and once the door is closed, it cannot be opened during laundry.

suitable for washing clothes: wool, cashmere, silk and pure wool fabrics.

It is said that almost 1% households in Europe and America use drum washing machines. Compared with the pulsator washing machine preferred by consumers in China, the drum washing machine has a wide washing range, which can wash high-grade clothes such as wool and silk, and the washed clothes are not entangled, so the wear on the clothes is small. For example, the wear rate of Chunlan drum washing machine is only 1/3 of that of ordinary pulsator washing machine; The drum washing machine has a high rotating speed, up to 1 revolutions per minute, and can also heat water, so that the washing degree of clothes is very high; At the same time, the drum washing machine uses the unique damping and balancing system to minimize the noise; Because of advanced technology and exquisite workmanship, the service life of drum washing machine is twice that of pulsator washing machine.

the drum washing machine has two advantages: one is water saving. The pulsator washing machine needs to inject a lot of water into the bucket to drive the clothes; The drum washing machine makes clothes fall and water beat, which requires less water. Secondly, the drum washing machine has a low degree of wear on clothes. When washing clothes, the drum washing machine beats clothes with a wooden stick, while the pulsator washing machine stirs clothes back and forth. Therefore, the drum washing machine has lower wear on clothes. In addition, drum washing machines are pioneers in environmental protection, which may be another important reason for their popularity in Europe and America. Drum washing machine can not only save more than half of water, but also save a lot of detergent and reduce the discharge of domestic sewage.

The working principle of the drum washing machine is that there is water at the bottom of the washing barrel, and clothes are lifted to the high place of the drum, and then fall to the water surface under the action of gravity, so as to wash the clothes. The pulsator washing machine relies on the turbine at the bottom of the washing bucket to drive the water in the bucket, and then the water flow drives the clothes to stir left and right to achieve the purpose of washing.

The drum washing machine is better than the Apollo wheel washing machine in terms of cleanliness, abrasion, service life and energy consumption. The washing machine is in direct contact with the clothes, and the technology of the inner barrel is directly related to the cleanliness of the clothes. The punching edge of the inner barrel should be smooth, and the outer surface of the raised inner barrel must be arc-shaped without edges and corners, so as not to cause wear and snagging on clothes; In addition, the more the number of holes punched in the inner barrel, the faster the water passes and the cleaner the rinsing.

Some clothes must be sent to dry cleaners

Although many manufacturers are developing environment-friendly washing machines without washing powder and using oil agents such as gasoline to clean clothes that need dry cleaning, some clothes with special fabrics are still not as good as taking them to dry cleaners for professional washing. The so-called "dry cleaning" refers to the laundry process of removing oil stains from clothes with chemical solvents such as tetrachloroethylene (also known as dry cleaning oil) or petroleum cleaning agent, and then steaming and shaping. Compared with other washing methods, the biggest advantage of dry cleaning is that it can keep the prototype of clothes and avoid embarrassment such as shrinkage, deformation, glue opening and foaming.

professional laundries have very strict laundry procedures. Take Fornet Laundry as an example. After accepting the laundry entrustment from customers, we should first check the customers' clothes, classify them according to their cleanliness, dirt properties and fabric, and determine the stain removal and washing scheme. Second, before washing clothes, clean those dirty parts first, and remove the stains that are difficult to clean in the dry cleaning process in advance with special tools. Thirdly, after choosing an appropriate washing method to clean customers' clothes, it is necessary to reprocess the stains that have not been completely removed during the washing process with a special detergent. Fourth, ironing the clothes that have completed the washing and stain removal procedures. Professional dry cleaners have very complete clothes shaping equipment, which can completely ensure that suits, coats and other clothes do not go out of shape after cleaning. Finally, the staff of the dry cleaners will check the washing quality of the clothes that have completed all the processes, and then separate them according to customers, package them and hang them on the transportation line.

In this way, some expensive clothes must be washed by professional and regular dry cleaners, because only their strict laundry procedures can ensure the cleanliness and deformation of clothes with special fabrics after washing. So, which clothes should not be washed by washing machine?

1. Woolen clothes should be dry-cleaned and not washed in the washing bucket. Because many parts of woolen clothes are sewn with needles, and the interlining is mostly cotton and linen fabrics, it will be deformed due to uneven shrinkage after water absorption when it rotates and rolls in the washing bucket.

2. Fur, pure wool and soft satin, woven brocade, hollowed-out or inlaid silk clothing products must be dry-cleaned. Because silk clothing is thin and soft, and its wear resistance is poor, it is easy to fluff when washed in a high-speed washing tub, and even a lot of fluff balls are formed on the surface, fur, wool and satin will lose their luster, and hollowing or embroidery will be seriously shrunk and deformed. In addition, blended and chemical fiber suit tops are best dry-cleaned. Dry cleaning can avoid the deformation of wool lining and hemp lining, foaming or glue opening of adhesive lining in suit jacket.

3. Work clothes stained with gasoline should not be washed in the washing machine. Because gasoline is flammable and explosive. Not only does the oil spread and pollute and corrode the washing machine, but it may also be dangerous because of the ignition phenomenon of the running washing machine.

dry cleaning clothes should not be worn immediately

It must be noted that clothes that have been taken to the laundry for dry cleaning cannot be worn immediately. Dry cleaning uses detergents or solvents to remove stains from clothes. The solvent is not necessarily water, such as alcohol, mineral oil, etc. At present, the most common solvent for dry cleaning is tetrachloroethylene, and the skin will absorb the gas volatilized from tetrachloroethylene. In addition, the research report of the U.S. Environment Agency shows that the gas emitted by dry-cleaning clothes with slight humidity is one of the substances that pollute indoor air. Carry-on bags containing dry cleaning clothes will retain toxic solvents. If your clothes must be dry-cleaned, please take off the plastic cover immediately when you take the dry-cleaned clothes home, and hang the clothes in a ventilated place to let the dry-cleaning solvent on the clothes evaporate, sometimes it takes a week to disperse.