1,000 words summary of auto repair internship (general 5 articles)

The hard internship life has come to an end inadvertently. Looking back on the past internship experience, I feel fulfilled and gained a lot. , we need to go back and carefully analyze and summarize this internship experience. Are you at a loss to write or have a clue? The following is a 1,000-word auto repair internship summary that I collected and compiled. It is for reference only. I hope it can help everyone.

Summary of Auto Repair Internship 1

Practice is to apply the theoretical knowledge we learned in school to objective reality, so that the theoretical knowledge we have learned can be used. . If you only learn without practicing, what you learn is equal to zero. Theory should be combined with practice. On the other hand, practice can lay the foundation for finding a job in the future. Through this period of internship, I learned something that I couldn't learn in school. Because the environment is different and the people and things you come into contact with are different, the things you learn from them are naturally different. We must learn to learn from practice and practice from learning. Moreover, China’s economy is developing rapidly and it has joined the WTO. The domestic and foreign economies are changing day by day. New things are emerging every day. While there are more and more opportunities, there are also more challenges. I just learned what I just learned the day before yesterday. The knowledge we learned may have been eliminated today. The more China's economy integrates with the outside world, the requirements for talents will become higher and higher. We must not only learn the knowledge learned in school, but also continue to learn from it in life. , practice other knowledge in middle school, and constantly arm yourself from all aspects, so that you can stand out and express yourself in the competition.

1. Purpose of internship:

Through the internship in the automobile repair shop, I have a good understanding of the related aspects of automobile damage repair. At the same time, combined with the major I have studied knowledge, observed and understood the structure and accessories of automobiles, laying the foundation for further learning of professional knowledge.

2. Internship time: x, month x, 20xx

3. Internship location : Car repair shop

IV. Internship content: Simple vehicle damage repair method:

1. Clean the damaged area first and fill it with repair paint. To enhance the adhesion effect, you can sand it with high-grit sandpaper first.

2. If the metal at the scratch is exposed, apply an oxidation neutralizer with good anti-rust effect before painting. After the neutralizer is completely dry, spray primer and repeat painting.

3. It is most taboo to spray a thicker paint layer at one time for touch-up. It is labor-intensive and time-consuming and difficult to control the effect of touch-up. Bubbles and sagging are prone to occur.

4. If you don’t have time to go to the repair station to repair the car, you can first apply a layer of nail polish on the damaged area to prevent oxidation and rust. Some professional car detailing shop paints can be done in two to three hours.

5. Internship experience:

1. The importance of team spirit and cooperation in work. Everyone will not have exactly the same views on everything, so it is normal to have differences when dealing with things. But as everyone gets to know each other, differences will gradually be reduced and work will be carried out more and more smoothly. Only when everyone is unified in thinking, thinking in one place, and working hard in one place, can the work be completed smoothly and brilliantly. Then we should develop a team spirit and unite the collective when we study.

2. The importance of always being prepared at work. A good start is half the battle. This sentence has been said by many people, but only after experiencing it can you realize its true meaning. You want to launch an activity. If the publicity work is not done well and no one comes to participate, how can the activity be carried out? No matter how well prepared you are, it's all in vain, who are you going to show it to? If you do not prepare adequately in the early stage, and there are many spectators or participants, you will definitely be in a hurry, let alone perform at your best. From this event, I fully realized that preparation is the prerequisite for all work. Only by being fully prepared can we complete the task well. It's like repairing a car. If the car owner is in a hurry, you start work quickly, which means you have previous preparations.

3. As long as you work hard and do something with your heart, no matter what the result is, you will be successful! I gained a lot from this social practice and gained a lot of feelings. The above is just a part. I believe that through future work practice, I will definitely make greater progress.

Through this social practice, on the one hand, I have exercised my abilities and grown in practice; on the other hand, we have made our own contributions to society; but during the practice process, I also showed Insufficient experience, immaturity in dealing with problems, insufficient integration of book knowledge and practice, etc. After arriving at school, I will cherish my time studying at school even more, strive to master more knowledge, and continue to go deep into practice to test my knowledge. , exercise my abilities and lay a solid foundation for better serving the society in the future. The short-term social practice passed by in a flash, but I realized the distance between me and society, and also allowed myself to deepen my understanding of the social practice. The relationship with people from all walks of life has narrowed the distance between me and society. It has also broadened my horizons and increased my talents in social practice, and further clarified the path to success and the historical mission of our young students. Society is the big classroom for learning and education.

In that vast world, my life value has been reflected, laying a solid foundation for the fierce competition in the future. I hope there will be more such opportunities in the future, so that we can get exercise from practice. Auto Repair Internship Summary 2

xx Sales and Service Co., Ltd. is a company with xx fixed-point and directly provides first-class maintenance equipment: lifts, tire balancing machines, body calibration stands, paint booths, etc., using Computer network for maintenance business. The spacious and clean business reception hall and spacious maintenance workshop are equipped with 24 standard workstations to fully meet the needs of maintenance operations. Complete specifications, high-quality and pure accessories are the safety guarantee for the operation of xx series vehicles. xx Sales and Service Co., Ltd. is a large-scale four-S shop. It sells and services xx, xx, xx, etc., with a total of nine models.

1. Through production internships, deepen the understanding of the status and role of the automotive profession in the national economy, consolidate professional thinking, and stimulate learning enthusiasm.

2. Be familiar with the car repair environment and repair tools. Accumulate certain knowledge and experience for future work.

3. Broaden our horizons, enhance professional awareness, and consolidate and understand professional courses.

4. Through on-site maintenance internships and communication and guidance with company employees, integrate theory with practice, confirm, deepen, consolidate and enrich the theoretical knowledge learned, cultivate the ability to analyze and solve practical engineering problems, and provide Lay a solid foundation for subsequent professional knowledge learning, course design and graduation project.

Wiring

Nowadays, the more high-end the car, the more complex the electronic control part, the more sensors, and the wiring is very numerous. When installing, pay special attention to its direction and the purpose of each wire harness. Otherwise, problems such as the wiring harness being too short or too long may occur. This requires the car repairman to be very familiar with the route of the car. When connecting the plug wires, pay special attention to the size, hole position, color and other characteristics of the two plug holes.

Installing the instrument and workbench

The circuit of the instrument assembly is a modern integrated circuit, and you only need to insert the corresponding plug on it. Components such as air conditioning air volume control ports, negative driving position airbags, and brackets for fixing the workbench should be installed on the workbench.

In general, this internship gave me two gains: adaptation to the working environment and socialization; and the combination of theory and practice.

From the beginning to the maintenance workshop, the smile of my master gave me a good start for my internship. During the entire internship process, except for a few special circumstances, I went to work on time every day. , after get off work, often attend morning meetings, and get along well with most of the masters.

This production internship gave me a valuable life experience. I have a more detailed and profound understanding of my major. It is also the consolidation and application of the knowledge I have learned in college in the past few years. During the internship, my theory was in real contact with practice, and my thinking and reality were combined. These all have a subtle or shocking effect on my ideas. From this internship, I realized that there is a certain distance between actual work and book knowledge, and further study is needed. However, this short three-week internship time is far from being able to gain an in-depth understanding of an industry and greatly improve professional skills. What is learned and seen is superficial and rough.

The internship also gave me a clear understanding of my many shortcomings: I am not practical and steady enough in doing things, my social skills have a lot of room for improvement, and my professional English is not solid enough. Auto Repair Internship Summary 3

In order to complete the combination of theory and practice, the communication between school and society, and further improve students’ ideological awareness and practical ability, especially the practical ability to observe, analyze and solve problems, In order to train students into high-quality compound talents who can proactively adapt to the needs of socialist modernization, starting from September 20xx, teachers from the Automobile Major Department led students to carry out an internship for nearly half a year at the Boyou Auto Repair Factory of our school. , the internship situation and results are now summarized as follows:

1. Clarify the purpose of the internship:

Stage internship is an important part of school teaching. Although students’ social practice is arranged in a complete It is conducted during the semester, but does not have an absolutely independent meaning. It is an on-the-job internship program for auto repair students. One of its important functions is to use teaching results to test learning effects. It is to take a look at the distance between classroom teaching and actual work, and through comprehensive analysis, find out the shortcomings in teaching, so as to provide practical basis for improving teaching plans and reforming teaching content and methods.

1. Cultivate students' practical ability. However, classroom teaching alone is not enough to cultivate this practical ability. Especially for automobile maintenance, a highly practical subject, it must move from the classroom to factory. In recent years, our school has focused on the counterpart internship factories in the arrangement of teaching internship units. The purpose is to allow students to understand the actual operation process through personal practice, become familiar with the basic links of factory management, and actually experience the basic skills of an auto repair worker. Quality requirements to cultivate one's own adaptability, organizational ability, coordination ability and ability to analyze and solve practical problems.

2. Rehearse and prepare for employment.

Through internships, students can find out the gap between their own situation and the actual needs of society, and timely supplement relevant knowledge during the subsequent study period, so as to fully prepare themselves for job hunting and formal work, thereby shortening the psychological transition from campus to society. Expect.

2. Implement internship management for students

Internship students have a dual role. They are both students sent by the school and staff of the internship unit. In view of this, we have put forward three requirements for students:

1. Conduct internships as formal staff. Students are required not to relax because of their status as interns, but to strictly abide by the relevant rules, systems and disciplines of the internship unit, actively strive for and work hard to complete various tasks assigned by leaders, start from small things, humbly seek advice from experienced comrades, and work as soon as possible Adapt to the environment, constantly look for gaps in yourself, expand your knowledge, and cultivate practical work abilities.

2. Intern as a “bystander”. During the internship process, students are often assigned to a specific position, and the work may be trivial. We require students to consciously obey the arrangements of the internship unit. At the same time, they should also take a long-term view and start from the overall situation of factory work to understand the basic rules of enterprise operation, the basic mentality of workers, the principles of enterprise management, etc. This kind of observation and Training can enable students to become familiar with the factory on a broader level and enhance their adaptability.

3. Intern as a “researcher”. Students are required to determine some topics through "two-way selection" (specified, self-determined) before internship, actively explore ways to combine theory and practice, use internship opportunities to go deep into the factory, understand new technologies in the auto repair industry, become familiar with operating procedures, and pay attention to The latest industry trends lay a solid foundation for the ultimate enterprise. Summary of Automobile Repair Internship 4

According to the requirements of the school teaching plan and the actual situation of our school, under the careful organization and leadership of the school’s production internship office, xx-level automobile operation and maintenance major students completed the first semester of 20xx Completed a 4-month production internship. Production internship is a very important practical teaching link in the teaching plan of automobile operation and maintenance major, and it is an important course that integrates theory with practice. Through production internships, students are provided with intensive training in professional skills, cultivating students' ability to conduct in-depth investigation and research, analyzing and solving problems, and cultivating students' social activity and organizational skills.

Through production internships, students can understand the differences between work and study, realize role transformation, and lay a solid foundation for students to successfully enter the workplace. In mid-June, all tasks were successfully completed and the expected goals were achieved. Through this practical teaching activity, students have a deeper understanding of the connotation and application of this major and broadened their knowledge. It is a good opportunity to combine theory and practice, and has a certain guiding role in employment work. While students are doing internships, professional teachers conduct in-depth enterprise research, internship inspection guidance, and off-campus teaching. They go deep into enterprises and student positions in a timely manner to understand students' internship situations. Combined with on-site inspection guidance, they have achieved good results and accumulated certain experience.

1. Internship location

xxx Auto Repair Factory

2. Internship time

February 25, 20xx to June 20xx March 15

3. Internship method

The internship adopts a group-based centralized internship method. Students participate in the production activities of the repair shop, and the instructors and company technicians provide on-site guidance based on the engineering situation. , because the repair shop cannot accept too many students, the students are divided into three groups, with 5 to 6 students in each repair shop. Considering that each repair shop has its own particularities, in order to enable students to be exposed to more things in a limited time, the construction sites where students practice are rotated in the middle of the internship.

IV. Internship content

The main contents of the internship include: feeling the corporate culture, inspecting the corporate management model and operation methods, becoming familiar with working methods and techniques, and cultivating a rigorous work attitude and strict Quality awareness, cultivate teamwork spirit, improve hands-on ability and the ability to solve practical problems, understand some new products and technologies in the auto repair industry, and understand the structural characteristics and process characteristics of engines, chassis, electrical equipment and bodies of different models, Master the use of common tools and equipment for maintenance and repair of engines, chassis, and electrical equipment, conduct structural and wear analysis of the main components of engines, chassis, and electrical equipment, and diagnose common faults of engines, chassis, and electrical equipment. , judge, analyze and eliminate, correctly use the tools, equipment, instruments and meters commonly used in automotive electrical equipment maintenance, and have a preliminary understanding of automotive sheet metal and spray painting process methods and operating procedures.

5. Internship Methods and Process

The entire internship is divided into three stages: preparation stage, internship stage and summary stage.

The preparation stage includes the identification of internship safety contracts, internship mobilization, purchase of work clothes, preparation of study and daily necessities; preparation of relevant study materials; internship grouping, and selection of internship team leaders.

On February 26, all intern students held an internship mobilization meeting. At the meeting, the instructor made a detailed discussion on the purpose and significance of the internship, internship content, internship requirements, internship arrangements, internship performance assessment methods and other issues. Answer and issue "Production Practice Instruction Book" to each student.

On February 27, the internship instructor led the students to their own internship companies for four months of practical production learning.

During the internship process, we cultivate students' ability to connect with reality through class internships, special lectures, symposiums, etc.; practical ability; in-depth understanding of society, the ability to comprehensively analyze and deal with problems; the ability to deal with people and endure hardships The ability to endure hard work has successfully completed the school's internship teaching tasks.

At the end of the internship, based on the student’s internship diary, internship report, the company’s evaluation of the student, and the teacher’s evaluation of the student, the student’s performance will be evaluated according to five grades: excellent, good, medium, passing and failing.

6. Problems and shortcomings in the internship

Some students were not very interested in the internship. They just had a sense of freshness at the beginning and did not have any love for the profession. It leaves a bad impression on the company where you work. Due to the problem of internship funds, it is difficult for students to go to more places and companies for internships, which has a certain impact on the effectiveness of internships.

Through the four-month production internship, the students basically achieved the expected internship goals, had a clear understanding of the major they studied, strengthened their belief in learning the major well, and deepened and consolidated their knowledge of the major they studied. Theoretical knowledge has initially achieved the goal of integrating theory with practice. At the same time, it also plays a positive guiding role in employment choices in the coming year. Summary of Auto Repair Internship Part 5

On July 10, 20xx, on a special day, I started a 40-day internship in auto repair. During these 40 days, I mainly learned the relevant knowledge of the secondary maintenance of the car and the car repair business. Secondary maintenance is mainly to check and adjust the steering knuckle, steering rocker arm, brake shoe, suspension and other safety components that are prone to wear or deformation after a certain period of use. It also disassembles and inspects tires, performs tire rotation, and checks and adjusts. Vehicle maintenance operations performed by maintenance companies are responsible for engine operating conditions and exhaust pollution control devices.

As a means of transporting passengers or transporting goods, cars are also consumables. In order to maintain their excellent performance, they generally need to be sent to the factory for secondary maintenance every 7,500-10,000 kilometers. The acceptance criteria for secondary maintenance of automobiles are mainly the following points:

1. After the engine has passed the three cleaning and three filtering operations, it should be easy to start, run smoothly, have normal exhaust (meaning that the exhaust gas reaches the standard), water temperature, and engine oil The pressure meets the requirements, the rotation speed is stable, there is no abnormal noise, each belt is properly tensioned, and there is no four leaks (water, oil, electricity, gas).

2. The directional free travel and toe-in meet the requirements, the steering is light, flexible and reliable, and the front wheel does not swing left or right when driving.

3. The free stroke of the clutch meets the requirements, easy to operate, complete separation, smooth and reliable combination, no abnormal noise, and no oil leakage in the hydraulic system.

4. The gearbox, drive axle, universal joint (or half shaft) transmission device, etc. are well lubricated, reliably connected, no abnormal noise or overheating, no gear skipping, flexible shifting, and no oil leakage.

5. The brake pedal free travel and brake intermittent meet the requirements. The driving and parking brakes are good. There is no deviation or drag during braking. The inertia proportional valve works normally and does not Oil leak.

6. The tire pressure is normal (different models have different high and low pressure standards).

7. The cantilever and shock absorber are fixed reliably and function normally, and the hub bearing temperature is not high after driving.

8. The generator, starter, lights, instruments, signal lights, buttons, and switches are complete and complete and can work normally.

9. Add lubricating oil to all lubrication points of the entire vehicle.

10. Rinse and clean the entire vehicle. As long as the maintenance manufacturer completes the above 10 secondary maintenance tasks, the technical condition of the vehicle will be guaranteed, and the owner can pick up the vehicle with confidence.

The above is the perceptual and rational knowledge about secondary maintenance that I gained during my 40 days of study in the auto repair shop. Of course, my internship in the repair shop was only a short 40 days. Only gained some superficial knowledge. When I first arrived at the repair shop and started doing secondary maintenance orders, I would occasionally make some small mistakes. For example, when filling out the order, I would occasionally confuse the maintenance personnel of the big car with the maintenance personnel of the small car. Once such a mistake is made, the report form filled in incorrectly will be invalidated and must be reprinted, which will undoubtedly affect work efficiency. From then on, I immediately realized that when facing tedious work, I must maintain a rigorous and careful work attitude. This allows people to make fewer mistakes and mistakes.

In a short period of 40 days, I went from simply making secondary maintenance reports to being able to independently, skillfully and quickly complete secondary maintenance reports for various types of vehicles, although this is only a small step. It is a leap, but it has a special meaning for my life. It marks my gradual growth in an unfamiliar industry and the colorful notes written in the process of my life's growth. "There is a road to a mountain of knowledge and hard work as a path, and there is a boundless sea of ??learning as a boat." In this rapidly developing society full of challenges and competition, as an auto repair professional teacher, I have no other advantages but my own diligence. To fill in the gaps. "God rewards hard work", I believe that in this industry we will gradually grow, go further and do better and better.

Finally, I would like to thank the leaders of the company for their care and guidance for me. I would like to thank the leaders of the group company for providing me with such a learning platform. I would also like to thank all the teachers and colleagues for their help and guidance in my work. .

;