The double-head cutting machine can be installed on an ordinary electric drill, pneumatic tool or drilling machine to cut metal plates at will. Install straight and round attachments to cut and fix straight lines and arcs.
1 with two adjustable cutting heads.
2. The cutter head can be positioned in any direction of 360 degrees.
3. Choose 8mm electric or pneumatic drill, rotating speed 1500-3000 rpm and minimum cutting radius12 mm..
5. Allowable cutting thickness of ordinary steel plate: 2mm.
Stainless steel plate:1.2mm.
Copper-aluminum plate: 2mm
Plastics and Fiberboard: 2mm
II. Sheet cutting machine DC- 160B (imported)
The double-head cutting machine can be installed on an ordinary electric drill, pneumatic tool or drilling machine to cut metal plates at will. Install straight and round attachments to cut and fix straight lines and arcs.
1 with two adjustable cutting heads.
2. The cutter head can be positioned in any direction of 360 degrees.
3. Choose 8mm electric or pneumatic drill, rotating speed 1500-3000 rpm and minimum cutting radius12 mm..
5. Allowable cutting thickness of ordinary steel plate: 2mm.
Stainless steel plate:1.2mm.
Copper-aluminum plate: 2mm
Plastics and Fiberboard: 2mm
Three. Paper cutter DC- 160C
The double-head slicer is fixed on a common electric drill, pneumatic tool or drilling machine, which can cut metal plates at will and irregular plates such as glazed tiles. Install straight and round attachments to cut and fix straight lines and arcs.
1 with two adjustable cutting heads.
2. The cutter head can be positioned in any direction of 360 degrees.
3. Choose 8mm electric or pneumatic drill, rotating speed 1500-3000 rpm and minimum cutting radius12 mm..
5. Allowable cutting thickness of ordinary steel plate: 2mm.
Stainless steel plate:1.2mm.
Copper-aluminum plate: 2mm
Plastics and Fiberboard: 2mm
Four, thin plate cutting machine DC- 180
The invention can be fixed on common electric drills and pneumatic tools to cut and saw metals or nonmetals at will. It will be more accurate to cut with straight and round fittings.
1, optional 10mm electric gun drill or gas drill.
2. For cutting iron plates below 1.6mm and stainless steel plates below 1.2mm, the tool rest can be adjusted 360 degrees (reference speed: 3000rpm-2m/min). Replacing the tool holder can cut plastic plates, fiberboards, plexiglass, plywood, etc. below 5mm. ..
3. Saw non-metallic materials such as plates, plastics and plywood below 20 mm .. (Reference speed is subject to gear type: above 3000rpm-1m/min.
4. Saw metal materials such as iron and copper below 5mm (the reference speed is-65438+0 m/min below 300 rpm according to the tooth type) 5. Minimum cutting diameter: 25mm.
6. Minimum sawing and milling diameter: 30mm.
Verb (abbreviation of verb) paper cutter -DC-200 electric punch
Various shapes can be cut on metal plates below 3.5 mm, and there is no spark, smoothness and burr when cutting.
1. Cutting thickness: iron plate ≤ 3.5mm/stainless steel plate ≤ 2.0mm.
2. Minimum cutting radius: 250mm.
3. Input voltage:100 ~ 240 V ~ 240 V.
4. Power frequency: 60 ~ 50hz
5. motor power: 550W W w.
6. Motor speed: 25,000 rpm
7. Output speed: 800RPM paper cutter accessories and consumables.
Consumables: tool rest DC-F.
Material and hardness of hilt: high speed steel forming quenching hardness HRC58-60.
Instructions for replacing the cutter bar: Open the protective cover, take out the locking screw, loosen the set screw, align with the positioning hole on the cutter bar, pull out the cutter bar in the direction of arrow with pliers, reinstall the cutter bar and tighten the screw.
Accessories: tool holder DC-Z.
Fix the cutter and the jackhammer with plastic bracket on the workbench, and fixedly cut round or square holes.