First, the front wheels slip.

If the front wheel slips, no matter how you steer, you can't control the vehicle. The main reason for the front wheel slip is that the speed is too fast when turning. To solve the problem of front wheel slip, different measures should be taken according to the different driving conditions of vehicles.

1, rear-drive vehicle

First, release the accelerator pedal. Never step on the brake or clutch pedal. Then turn the steering wheel to turn the front wheels in the right direction. The front wheel must be in the same direction as the body. The direction must be controlled. If the direction changes, it may continue to slide. If the adhesion of the front wheel of the vehicle is restored, then you can lightly step on the accelerator and turn back in the right direction.

2. Pioneer car

First, slowly release the throttle, but don't let go, and keep the vehicle moving forward. At this time, if you suddenly slow down, it may cause the rear wheel to slip, so you can't step on the clutch or brake, and don't go back to the positive direction. Instead, you should turn the steering wheel slowly and turn to the direction where you are ready to drive. Slow down, don't be too hasty and don't overdo it.

Second, the rear wheel slips.

If the rear wheel slips, there may be a phenomenon of "tail flick" and even the body rotates. If the rear wheel slips, the treatment method is the same without distinguishing between the front drive and the rear drive.

First of all, you should let go of the accelerator or brake, don't step on the clutch, and control the steering wheel. Then turn the steering wheel in the direction of swinging the tail. For example, if the vehicle slides to the right, it will impact to the right. Don't roll over too much. If it is corrected, then you can drive on.

Three or four wheels slip.

If the four wheels slip, release the brake pedal without hesitation, and you can not step on the clutch pedal until the four wheels resume rolling.

Although these emergency measures are important, they are most afraid of making mistakes in busy work, so prevention is the main thing to avoid slipping. So how to avoid vehicle skidding? If you encounter slippery roads, you should take the following measures.

1, keep the speed, and don't step on or lift the accelerator;

2, keep a safe distance, the speed should not be too fast;

3. Be careful when changing lanes and overtaking to avoid slamming the direction.