Wall leveling must be done when decorating a house. If we do not do wall leveling, then we will not be able to proceed with the next step. Therefore, wall leveling is a must when decorating a house. So, do you know what the methods of gypsum leveling and putty leveling are? Let’s take a look at the methods and leveling materials of gypsum leveling and putty leveling?

The methods of gypsum leveling and putty leveling ?

1. Cleaning the wall well is the first thing to do when leveling gypsum and putty. When cleaning the wall, you should first check to see if there are any cracks in the wall. If there are any uneven areas, they should be filled with cement. Only in this way can we proceed to the next step.

2. Next, what friends need to do is to scrape the putty for the first time. If you scrape the putty for the first time, you must remember not to add anything, so Then the putty will stick to the wall more closely, and it will also be stronger.

3. After the first putty is completely dry, it must be polished and smooth before proceeding with the second putty. This is something everyone must remember. matter.

4. Generally, 2-3 days after applying the second coat of putty powder, you can use sandpaper to polish the wall or ceiling. After the first coat of polishing, you need to apply two more coats of emulsion glue. . If the milky white glue is painted, the room cannot be ventilated and the milky white glue is allowed to dry naturally. It cannot be forced to air dry. Forced air drying will cause small cracks on the surface of the wall.

Gypsum leveling and putty leveling materials

1. Gypsum-based full-batch powder is made of fine semi-hydrated gypsum powder (gypsum of paris) and a variety of additives. Material. It has the characteristics of high bonding strength, small shrinkage and deformation, prevention of peeling, powder loss, and cracking, good conformability, excellent construction performance, and green and environmental protection. Suitable for full batch processing of various wall surfaces. It is a new wall treatment material in the 21st century.

2. Rough leveling is an indoor wall leveling material mixed with fine semi-hydrated gypsum powder (gypsum of paris), orthopedic materials, and various additives. It has the characteristics of high bonding strength, small shrinkage and anti-cracking, good adaptability, excellent construction performance, and green and environmental protection. Suitable for various bottom leveling treatments, adding slots, holes, and large gaps.

3. The interior wall leveling and repair mortar is made of flexible re-laxable rubber powder, inorganic gel materials, various natural mineral deposits and various additives. It has excellent bonding strength and crack resistance. It has excellent adhesion to various base materials and can effectively prevent the occurrence of poor adhesion, cracking and hollowing caused by caulking gypsum and stucco gypsum base.

When decorating a house, leveling the walls is indispensable. No matter what materials are used for decoration, leveling steps are required. Of course, the leveling methods for each material are very different, so it is necessary to learn how to level them. The above is the difference between gypsum leveling and putty leveling and the leveling materials introduced by the editor. This ends here.