1. Main content and scope of application

This system stipulates all management procedures for a company’s aluminum profile packaging workshop. This system applies to aluminum profile packaging workshops.

2. Aluminum profile finished product packaging management matters

2.1 Aluminum profile packaging workers must absolutely obey the quality inspection and squad leader’s instructions, complete their tasks, and complete the production technology department’s instructions at any time cargo task. Anyone who disobeys instructions or production arrangements will be fined 50 yuan each time.

2.2 The color of the same bundle of aluminum materials must be uniform, and unqualified aluminum materials cannot be mixed into qualified aluminum materials for packaging. If it is found that the output of each buckle is 1000kg.

2.3 If the surface of the aluminum material is not clean and the moisture is not dry, the aluminum material should be cleaned and dried before packaging. Failure to comply with this requirement will result in a fine of 50 yuan for each discovery.

2.4 Before each bundle of aluminum materials is packaged, the aluminum materials should be tied tightly with nylon ropes on both sides about 1 meter away from the material head to prevent the separator paper from falling out. If it is not tied or not tied as required, The fine is 50 yuan for each bundle.

2.5 During packaging, the paper spacer in the middle of the aluminum material must not fall out. If it falls out, the paper should be re-separated before packaging; offenders will be fined 50 yuan for each package and have to rework.

2.6 When packaging, the paper should be rolled tightly so that each bundle of materials has edges and corners. The wrapping paper must not be loose. The aluminum material opening of the plastic bag and wrapping paper must not be exposed. Each unqualified bundle will be fined. 50 yuan and rework.

2.7 The trademark paper should be clearly written and neatly pasted. If there is no trademark paper, or if the trademark paper is unclearly filled out or not neatly pasted, a fine of 50 yuan will be imposed and rework will be required for each package.

2.8 The plastic bags should be wrapped with aluminum materials according to the required size and fixed with adhesive tape. Each bundle of materials should be tied with adhesive tape four times at an average distance. If the bag does not meet the requirements, a fine of 50 yuan and rework will be imposed. .

2.9 When transporting aluminum materials into the warehouse, each vehicle must not exceed 60 bundles of aluminum materials. Violators will be fined 60 yuan per vehicle.

2.10 Large tricycles cannot be used to transport aluminum materials into the warehouse. Violators will be fined 50 yuan.

2.11 Do not occupy the warehousing vehicle. Vehicles must enter the warehouse in time after loading. Violators will be fined 50 yuan each time.

2.12 Packaged and unpackaged aluminum materials should be handled with care, and the aluminum materials must not be scratched or scratched. A fine of 50 yuan will be imposed on each aluminum material that is damaged.

2.13 Each bundle of aluminum material should be wrapped with paper in the required number of grids. No more or less packaging should be done. At the beginning, one grid of paper should be rolled along the opening of the aluminum material. The paper should not expose the opening of the aluminum material. On one side of the trademark paper, the separator paper should be retracted by 10 centimeters. If the requirements are not followed, a fine of 50 yuan will be imposed for each tie.

2.14 When entering the warehouse, aluminum materials should be sorted into categories, handled with care, and placed neatly. Those who do not place the aluminum materials in a disorderly manner according to the regulations when entering the warehouse, or who place the aluminum materials with careless hands and feet will be fined 50 yuan and have to be reworked every time they are found.

2.15 Trademark paper, plastic bags, and wrapping paper must be properly kept and must not be left lying around. They must not be taken away by others at any time. Each person found guilty will be fined 50 yuan.

2.1 During the packaging process of aluminum profile 6, waste such as the bottom paper of the trademark paper, the rubber rope of the wrapping paper, the cardboard tube of the plastic bag, the paper circle of the adhesive tape, etc. should be dumped into the garbage pool. Violators will be fined 50 yuan each time.

2.17 The small horizontal bars when separating materials should be placed between the two stools and should not be thrown around. When leaving get off work, the small horizontal bars should be neatly placed in the iron frame and then placed next to the wall. The useless small horizontal strips are tied up and sent to the casting workshop. Each time you fail to comply with the requirements, you will be fined 50 yuan.

2.18 During the packaging process of aluminum profiles, the short paper that falls out should be picked up and wrapped on the aluminum material as soon as possible. The ground should always be kept free of waste materials. A fine of 50 yuan will be imposed for each failure to comply with the requirements.

Before getting off work on 2.19, move the remaining wrapping paper and plastic bags to the wall and put them away. If you fail to do so as required, you will be fined 50 yuan each time.

The 2.20 aluminum profile packaging workshop can only use 8 high stools per shift, 2 wrapping papers, 2 holding materials, and 4 separators and binding ropes. Zhang was fined 50 yuan. Before leaving get off work, the high stool should be placed next to the wall and the low stool should be placed on the other side. Violators will be fined 50 yuan. (When the dismantling workers need high and low stools to dry materials, the packers should give way)

2.21 The place should be cleaned before leaving get off work. Those who fail to clean or do not clean thoroughly will be fined 50 yuan each time. (Clean the small horizontal strips once every Monday and Friday)

2.22 Aluminum profile packers are not allowed to use adhesive tape to tie their fingers for packaging. The trademark paper can only be sealed with aluminum and cannot be used for other purposes. This is illegal. Offenders are fined 50 yuan each time.

2.23 The fans used for blowing materials in each shift should be properly kept. Any damage to the fans caused by artificial damage will be compensated according to the price. During a power outage, the fan power supply should be disconnected first, otherwise a fine of 50 yuan will be imposed each time.