working methods
1. The surface of metal substrate should be lined with epoxy resin, and the surface of anticorrosive object should be derusted and cleaned.
2. Grind the metal surface with an angle grinder to remove rust, oil stains and attachments on the metal surface, and make the metal surface smooth, dry and clean.
3. In general, the base material should be coated with epoxy resin and constructed after it is completely cured.
4. Finally, according to the different requirements of customers, paste one, two or more layers of cloth with different paste materials.
5. Concrete epoxy resin anticorrosion lining
I. Check whether the concrete is dry enough to meet the pasting requirements.
J use an angle grinder or a hand brush to clean its surface to ensure its cleanliness.
K pits on the inner surface of the pool should be filled with anticorrosive putty to prevent bubbles and brush leakage when brushing the bottom material, so that the surface is even, smooth and bubble-free.
Finally, according to the construction requirements, paste one cloth with three oils, two cloth with four oils, three cloth with five oils, four cloth with six oils, five cloth with seven oils and six cloth with eight oils.