Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - The whole process of how to put on a single braces.
The whole process of how to put on a single braces.
The wearing process of the single strap is as follows:

1. Cleaning the tooth surface: Dentists will use a small brush similar to an electric toothbrush and a polishing paste to clean the tooth surface, laying a good foundation for wearing braces. This process must clean the tooth surface, otherwise it will affect the bonding effect of the adhesive and lead to the bracket falling off.

2. Bonding brackets: After the tooth surface cleaning is completed, the dentist will first treat the tooth surface with weak acid, and apply the treatment liquid on the tooth surface to strengthen the combination with the bonding material. Next, a layer of resin glue will be coated on the back of the bracket, and then the bracket will be glued to the teeth, and the excess glue will be scraped off.

3. Cure the adhesive: cure the adhesive quickly with a light curing lamp, so that the bracket can be firmly fixed on the teeth.

4. Adjustment and wearing: After the braces are fixed, oral photographs need to be taken again to adjust the position of the braces according to the specific conditions of the teeth. The dentist will make sure that the braces fit the teeth completely and there is nothing inappropriate.

The above is the whole process of wearing single braces. If you have more related questions or need more detailed explanations, you can consult a professional dentist for help.