Plastic experts in the Corps pointed out that the clinical manifestations and surgical methods of alar width are as follows, and there are different ways to solve the problem of alar width under different circumstances:
1. If the alar width is combined with the nostril width, how to solve the alar width problem? The alar base part is removed and the nostril is narrowed, which can be carefully carried out in the alar width plastic surgery. Design of alar width plastic surgery The incision is located at the base of alar and the lower part of alar groove. Under local anesthesia, part of the full-thickness tissue of the alar base was properly removed, and then the nostril was rotated inward to narrow and sutured intermittently in layers. The length of scar visible after large-scale plastic surgery of nasal alar is generally less than 1cm.
2. If the alar margin is wide, how to solve the problem of alar width can be solved. The alar width can be corrected by partially cutting off the alar free edge, and sewing the incision on the inner surface of the alar after trimming.
3. If the nostrils are small, the alar is wide or the upper part of the alar groove is too full, how to solve the problem of alar width can be solved. Nasal alar width plastic surgery can be used to make a skin incision along the front edge of the lateral corner of alar cartilage, and the skin and inferior alar cartilage can be secretly peeled off. The bloated soft tissue on the cartilage surface can be removed by alar width correction surgery, and then the upper and lateral parts of alar cartilage can be appropriately removed. Then cut off a diamond-shaped vestibular skin and nasal mucosa in the nostril and inside the base of the alar to remove excess fat tissue. Finally, the incision on the edge of the nostril is stitched with the incision on the inner side of the alar base, which perfectly solves the problem of how to deal with the alar width.