1, because of the direction and shape of pine trees, we need to know the direction, according to the length of trunk, main branch, branches and leaves. Considering the bending deformation of pine bonsai, it is necessary to maintain the natural primitiveness of pine stumps. Local and overall coordination, to achieve an ideal state.

2. Before bending, fix the pine stakes, and fix the stumps firmly without shaking. A slight shaking will have a great influence on the future molding.

3. In the bending position, break the rod with open-ended pliers. Broken rods in tandem cannot be stacked.

Method of bending pine branches:

There are many things to pay attention to when bending the trunk of pine trees. First, we should look at the growth trend of pine trees, including the distribution pattern of each branch, and then consider how to bend the trunk. The deformed shape should be consistent with the original place where the residual roots were unearthed, so as to form a whole and achieve the ideal effect.

Fix the residual limb before bending, without shaking. Slight shaking will affect the final molding. When holding the bend, open the pliers and break the pole in the middle of the trunk into a cross vertical shape. The positions of broken rods should not overlap, but should be connected in series. If you are in the same position, it will expand the influence impression.

The position of the loosening rod and pliers should be wound with a short piece of cloth rope, and the winding direction should be consistent with the bending direction to avoid and prevent the breakage. After bending, wrap it with cloth or film again to avoid bacterial infection, which will affect the healing of the main wound in the later stage and make the pine tree unable to grow normally.