Daily maintenance of colored brick plastic mold box
1. Before the first use, the colored brick mold box must be scrubbed with detergent or washing powder, then rinsed with clear water and dried before use. Otherwise, the product is prone to bubbles and pores.
2. During cement curing of colored brick mould box, a curing rack must be installed, and the rack plate must be flat. In order to prevent the bottom of the mold box from collapsing, it cannot be used.
3. After the colored brick plastic mold box is glued with cement, it is forbidden to remove it with hard objects. It needs to be soaked in 5% dilute sulfuric acid or hydrochloric acid (acid 30%, water 70%) for ten minutes, and then the residual cement is removed with a soft brush. Otherwise, it will affect the gloss and life of the mold box.
4. The demoulding device must be used when demoulding the colored brick plastic mould box, and it is forbidden to fall or buckle hard, which will seriously affect the life of the mould box and the finished product rate of colored bricks.
5. After using the colored brick mold box, the mold box must be placed neatly on the flat ground, and it is forbidden to be exposed to the sun in summer, otherwise the mold box will be deformed and cannot be used.
6. If the colored brick plastic mold box is slightly deformed, it can be soaked in boiling water for two minutes, molded while it is hot, and naturally molded after cooling.
7. The surface of the colored brick mold box should be scrubbed clean and coated with antirust oil, and the surface should be stained with oilstone, and the oil stain should be removed with clear water or hydrocarbon water. The oil tank on the moving parts should be smeared with a small amount of lubricating oil.
Selection skills of colored brick plastic mold box
When we get a new mold box, we should put it in light or sunlight. When we look at it from the side, we should feel some reflection, and then touch the mold box with our hands. We should feel very smooth but not rough. Then such a mold box should be made of high-quality materials.
Because the colored brick plastic mold box is made of plastic, it must have these characteristics of high-quality plastic.
If there is no smooth mold box, it is likely to be inferior. This is our experience in production, so we should try it when choosing the mold box.
Through the summary of the above small series, we have learned the usage specifications and maintenance methods of plastic mold boxes, and we also introduced the selection methods. I believe that through the introduction of the above contents, everyone has a further understanding of colored brick plastic mold boxes. When we use the colored brick plastic mold box, we must pay attention to its cleaning and maintenance, which can not only prolong its service life, but also make our products more quality. I sincerely hope that the above contents will be helpful to everyone.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~