Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and beauty - Why does the freezer only have one lap of refrigeration?
Why does the freezer only have one lap of refrigeration?
1, it may be that the bell mouth of the copper head is not well connected, resulting in refrigerant leakage. 2. It may be that the ambient temperature is too high, which leads to the failure of the condenser of the freezer. The heat dissipation effect is only half, and it can only be cooled in a circle above the freezer. 3. It is also possible that the power supply voltage at home is too low and the voltage instability affects the use of the freezer.

/

Suggested treatment:

1. If the refrigerant leaks due to connection problems, we can find an interface to reconnect. If the nut of the indoor unit or outdoor unit cracks and causes water leakage, then we need to replace it with a new nut and buy the same model in the store. If it is caused by the leakage of copper pipe welding, then we need to find the leakage of bifurcated pipe welding and correct it.

If the problem is caused by condenser damage, we should decide according to the situation. If it has caused refrigerant leakage, it should be repaired and replaced in time; If it is bent and not near the solder joint, then we can use pliers and other tools to repair it slightly on the premise of ensuring that the solder joint is not affected; If it is near the solder joint and does not affect the use, there is no need to deal with it too much.

3. If the power supply voltage is unstable, we can choose to buy the voltage stabilizer of the freezer online.