Use a fitter? ? Push the ball head of the club head against the protrusion on the inner surface of the wheel eyebrows, align the paint surface corresponding to the concave position with a hardwood flat soft cloth, and then hit the wood with a hammer until the concave position at the wheel eyebrows pops up. You can also use a sheet metal forming machine to repair the iron sheet as a whole, and then repaint a large area to repair the small dent in the wheel cover, which is relatively expensive.

The visual effect of light refraction is used to judge the position and degree of the sag, and the "skin" inside the car body is massaged by lever principle to gradually release the tension at the sag of the car body, so that the "entropy" value of the surface at the sag of the car body reaches the maximum, and the sag is restored to its original state, thus realizing the rapid, accurate and thorough repair of the sag of the car body.

Check the repair effect and look at it in light or sunlight. If the defect is not visible, it is considered as a successful repair.

Repairing dents in car doors can save money and time, but not all dents can be repaired. As long as the paint surface does not fall off and the depth of the dent is not very deep, then the dent is easier to handle. If the depression is located near the wheel brow, corner and AB column, the repair difficulty will be improved a lot.

(Photo/Text/Photo: The Beast in Question) Ask the world M5 Chuanqi GS8 AION V Macchiato DHT PHEV Latte DHT Gaohe HIX @ 20 19