1. Blow hot air on the small advertisement with a hair dryer, so that it is easy to remove the small advertisement after heating.
2. Cream. When applied to small advertisements, it can quickly penetrate between articles and non-viscose, and then the stains can be easily removed by rubbing. This cream can be stored for a long time and is very practical.
3, wind oil essence. Put a little on it and wait for two minutes. It can be easily torn off by hand.
4, you can tear off a layer of paper on the small advertisement, then you can coat it with alcohol or gasoline, then rub it back and forth on the surface with your hands, and finally wipe it clean with a cloth.
5, nail polish and hand cream, painted on small advertisements can dilute and dissolve those non-stick things.
6. Brush it off with a steel ball dipped in water, but it is not recommended to use it on precious metal items, otherwise it will leave scratches.
Extended data:
1. Cleaning principle of label adhesive
1. Label adhesive, also known as trademark adhesive, refers to the adhesive used to paste labels, which is divided into three types: pressure-sensitive adhesive, hydrosol and water-rewetting adhesive. Water-based label adhesive takes water as solvent, which is mainly applied and adhered when used, mainly including polyvinyl alcohol modified adhesive and casein modified adhesive. Water-re-adhesive label adhesive is mainly used for labeling or bonding small packages such as stamps and envelope seals.
Most label adhesives are pressure-sensitive adhesives. Self-adhesive label adhesive is also called self-adhesive label adhesive, commonly known as self-adhesive It is a composite material with paper, film or special material as fabric, pressure-sensitive adhesive coated on the back and protective paper coated with silicone as backing paper. Self-adhesive pressure-sensitive adhesive contains base material, tackifying resin, etc. According to the principle of chemical isomorphism and compatibility of polymers, the self-adhesive substrate or tackifier is diluted with appropriate solvent to make it easy to separate from the adhered object.
2. Cleaning principle of label adhesive: According to the components of the above adhesive, we can know that the components in pressure-sensitive adhesive belong to organic polymer compounds in the chemical field, and their viscosity is relatively high. According to the chemical isomorphism and compatibility principle of polymers, all organic solvents can dissolve the above polymer compounds, such as liquor, essential balm, alcohol, gasoline or nail polish thinner, and other organic solvents such as face cream, facial cleanser, detergent and hand cream have the same effect.
Two: How to remove the label adhesive of the automobile glass label adhesive?
1. Use professional glue remover or adhesive cleaning agent to clean, which is convenient, quick, effective, safe and reliable.
2. Because the glue used for the trademark label is not resistant to high temperature, it is baked with the warm air of the hair dryer first, and then removed by hand, leaving no trace.
3. If there are still traces after the above treatment, the following methods can be adopted:
Soak the towel with hot water first, and then wipe it repeatedly with soap until it is removed. Finally, wipe it with water. You can also use a cotton swab dipped in vinegar and essential oil to evenly spread it on the adhesive and scrape it back and forth. After a long time, you can also remove the glue from the car glass, but the most obvious effect is alcohol.
Dip a soft cloth with enough high-concentration alcohol, then soak and wipe the adhesive, and the adhesive will become soft and fall off. If the cleaning effect of alcohol on some adhesives is not obvious, you can gently wipe the adhesive with a soft cloth dipped in a little gasoline. However, because gasoline is destructive to some plastics or paints, you must first test the applicability.
Three: There are many cartoon stickers on the furniture, and various stickers are often posted on the security door, which will leave residual glue after being torn off. How to remove it?
1. Since all kinds of stickers are not resistant to high temperature, bake them with the warm air of a hair dryer first, and then tear them off without leaving any traces. What if it's torn off and there are traces? Any organic solvent such as alcohol, gasoline or kerosene can dissolve glue. If it is on ground glass, scrape off the adhesive tape and wipe it with turpentine.
2. Apply a thick layer of wind oil essence or nail polish and hand cream on the adhesive to be removed, let the above materials soak the adhesive, wait for a while, and then wipe it hard with a dry cloth to remove it.
3. Use special glue remover, first tear off the label, then spray glue remover to wipe it, and finally clean it with water.
4. Apply a little cooking oil to the label of jade. The easiest way is to tear it off as soon as it is soaked, and then wipe off the oil stains with a clean cloth dipped in detergent, or apply it with paint thinner and toothpaste, and wipe it with a cloth repeatedly, and it can be removed.
5. Many woven bag products have self-adhesive labels on them. Coat the surface with a layer of edible oil and leave it for 24 hours. After a day or two, the label will lose its stickiness and be torn off directly.
6. Squeeze the lemon juice on the hands and skin with dirt, and rub it repeatedly to remove the sticky marks. Advantages: it will not cause any harm to hands and skin. Disadvantages: the effect of removing glue from other objects is not good.
Four: How to remove the label sticker?
1. Machines, computers, metals, plastics, etc. There are self-adhesive anti-counterfeiting labels or warranty labels, which belong to anti-counterfeiting labels and are firmly affixed. Many friends have bought all kinds of plastic products, glass products, ceramic products and even small household appliances from supermarkets. There are trademark labels, certificate labels, anti-counterfeiting labels and so on. After the bar code label and price label are torn off, it is difficult to remove the traces left by the adhesive. Here are some common methods.
2. Used for PVC, PE and other paperless self-adhesive printing materials. It is relatively simple to disassemble, just wipe it clean. First, tear off the self-adhesive decorations attached to the surface of glass or goods, soak the towel with warm water and add soap, and then wipe it repeatedly at the self-adhesive marks.
3. Put the labeled items directly into the microwave oven for 2 minutes, and then take them out. You will be surprised to find that the label is no longer sticky. You can easily tear off the label with your nails and clean the glue at the same time, provided that the items are not afraid of heat.
4. Put the labeled items in the freezer or refrigerator for freezing. When the gel hardens after freezing, it can be directly torn off, which is suitable for alcohol, scraping and other methods.
5. Remove most of the adhesive with a blade or spatula, then dip the cloth with gasoline or acetone and wipe the remaining adhesive with alcohol. Gasoline and acetone are good organic solvents, which can dissolve adhesives and are suitable for removing hard bottom surfaces such as glass and floor tiles.
6. The simplest thing is to brush off the steel ball with water, which is suitable for hard objects that do not require beauty, otherwise it will leave scratches.
7. If the glue area is small, you can wipe it off directly with an eraser. Instead, tear off the label first, dip cotton in white wine and soak it soft, use a paper towel to absorb the water, and then use an eraser.
8. One of the most direct and commonly used methods: If the label glue doesn't stick for a long time, you can soak the sticky part with hot water, coat the glue with cooking oil, and then wipe it easily with a dishcloth with good friction. This method will basically not cause damage to items.
9. If it is paper label adhesive, you can use a hot air blower to blow the heat, regardless of the glass, plastic, wood and metal of the sticker. Blow it back and forth with the air pump a few times first, and then tear a small edge, and the effect is very good. Be careful and patient when tearing. If it still doesn't work, you can dip a cloth in a little wind-driven oil or use rubber for further treatment. This method is only suitable for high-quality glue, if it is very inferior. Disadvantages: Not suitable for heat-resistant soft plastics or digital products.
10. Remove the label with rubber gloves. Put the bottle cap horizontally in one finger of rubber gloves, adjust the position to become a tool to wipe the label, dip it in some water, wipe the label that has been soaked in water, and slowly erase the label. The second part: According to the isomorphic compatibility principle, various organic solvents are used to clean up the solubility of self-adhesive trademarks, but these solvents may also cause damage to the surface of some items, so we should adjust measures to local conditions.
Reference source Baidu Encyclopedia? Label adhesive