Because whether it is made of fill or glue, it will involve the polishing of the surface of the part, not just the polishing of the nozzle. You can fill in the color with a marker afterwards. After seamless grinding, it is bound to grind an area on the part, so it will cause a wide range of scratches, so it is bound to need to be colored, otherwise the model will be terrible ... "If it is an element group, it will not be seamless. If it is seamless, there will be color, so it will not be a plain group. "
2. Of course, mass array+tick mark can be extinguished, which is what I did when I first came into contact with the model.
First of all, generally speaking, extinction is the last step in model making, and no matter what happens, it will always be the last step. The principle is to spray a transparent protective paint on the model surface (which will be explained later) to protect the paint film of the parts, but because the protective paint itself has a certain effect, the sprayed parts will also have this effect.
3. Extinction tool
Very simple, protect a bottle of spray paint can and a bracket (usually homemade) for fixing parts.
1) Transparent protective paint (the following contents are taken from my answers to other questions)
There are three kinds of matte, semi-matte and glossy, which are transparent and colorless as the name suggests. Spraying a thin and uniform coating on the surface of parts can effectively protect the model paint surface and prevent fading. At the same time, the simulation effect of sub-extinction, semi-extinction or gloss is added to the model to remove the plastic texture.
Therefore, extinction is only an effect of protective paint. You can choose semi-extinction or gloss paint according to your needs. Because it is a vegetarian group, you don't need to prepare protective paint yourself, just buy spray cans on the market. Online stores are generally around 45 yuan/bottle, while physical stores are around 65 yuan/bottle. I often buy it online myself. Because it is cheap, I recommend a model shop called Qufengtang on Taobao. In addition, protective paints are divided into oily and waterborne.
2) brackets (I'll just say my own way)
Materials: a number of disposable wooden chopsticks, foam plastic board is not strong.
Cut each wooden chopstick into two small pieces 1 unit, fix the parts that don't need to be painted or exposed on the wooden chopsticks with double-sided tape, and then insert the wooden chopsticks into the foam plastic board to wait for air drying.
Convenience stores sell disposable wooden chopsticks. If there is foam, it should be in the building materials store ... I bought a model online, fixed it with foam, and then saved it for later use. In addition, there is an official coloring rack on the Internet, which is very expensive, like 70 yuan, but the quantity is still very small, just a skeleton, several plastic sticks and several shelves ... Personally, I think it is better to make it myself.
4. Extinction practice and technology
First of all, you can color each part separately (such as a foot, a head ...) or color the whole model together according to your preference. If possible, I hope to use the former as much as possible, because the effect is better and it is not easy to miss.
Specific practices
Fix the part on the bracket, take it to a well-ventilated place, shake the fire extinguisher evenly, open it for 30CM, spray a thin layer of transparent paint on it while rotating the part, and finally wait for air drying to assemble the part.
Pay special attention to
1. Remember to spray! As LS said, the surface of the part will be whitened if sprayed too thick, and the element group can be polished before doing it, unlike coloring. Once the element group is whitened, it can't be remedied. It needs to be simulated on the board frame in advance to find a good feeling.
2. Climate impact. Protective paint is actually painted. The best time is when the climate is dry, such as winter and summer. So pay special attention. The sprayed paint is originally solid particles, which will turn into water drops when it meets water in the air. Spray on the parts will accumulate, especially easy to whiten, so be sure to shake well before. If it is too wet, you can only suspend your homework first. ...
~ over ~