The folding method is as follows:
1. First, you need to prepare a rectangular gold paper, with the golden side facing down, and then fold a short side, the width of which is one-eighth of the length of a square side;
2. Then turn the golden paper upside down so that the golden side is up, and then continue to fold the edge to the same width as the first folding;
3. Then we turn over the golden paper that has been folded twice and continue to fold the golden side down;
4. Then we fold the unfolded side up and press it under the first folded gold paper;
5. Next, we will fold the two corners of the just folded part upwards in turn;
6. Then we press the top folded part of the other side onto the whole paper;
7. Then we fold the two corners of the just-pressed part inward;
8. Then we pull the two sides of the ingot outward, so that a gold ingot is finished. Next, just repeat this step and you can stack the desired numbers.
Yuanbao is an ancient currency, made of precious gold or silver. Generally, there is much silver and little gold. In the currency history of China, gold and silver were officially called "gold ingots", which began in the Yuan Dynasty. However, as early as the early Tang Dynasty, when Kaiyuan Bao Tong came to the world, the people had the meaning of taking huge money, which was pronounced as "opening an ingot".
In the Yuan Dynasty, gold and silver money was called "gold ingot", which means the treasure of the Yuan Dynasty. Gold is called gold ingot and silver ingot is called silver ingot, which has both political meaning and common name of gold and silver currency.
What are the simple folding methods of Jin Yuanbao? Gold ingot folding method: Fold two triangles on the left and right sides of a rectangular gold ingot folding paper, and fold the two triangles in half along the center line. Fold the left side to the right side, the right side to the back, and then tuck it into the fold. Open the bottom by hand, press on it, and it will be folded.
1. Prepare a rectangular piece of paper.
2. Fold two triangles on the left and right sides.
3. Fold two folded triangles left and right along the center line.
4. Fold the left side to the right side, fold the right side to the back, and then stuff it into the fold.
5. Open the bottom by hand, so that the gold ingot can be folded.
Precautions:
1. When the left and right sides are folded into a triangle, the diagonal lines should be parallel.
2. Fold the two folded triangles in half along the center line. Notice the back of the triangle.
Gold ingot folding method The gold ingot folding method is as follows:
Method 1:
1. First, prepare a square origami gold ingot folding method, fold the gold ingot in half, then fold the gold ingot in half in reverse, and then return to the two corners.
2. Fold it into an isosceles triangle at two corners, fold it in half and then fold it inward.
Finally, adjust the details, and the ingot will be folded.
Method 2:
1, prepare a rectangular origami first.
2. Fold the diagonal lines on both sides of the origami in half.
3. Turn the paper over and fold it in half.
4. Fold a corner inward and insert the sharp corner into the paper.
5. Turn it over and the other side is the same.
6. Then unfold the origami.
7. Simple gold ingot origami is completed.
Method 3:
1. Prepare a piece of tin foil paper with the ratio of length to width of 3:2.
2. Fold the tin foil in half along the long side, paying attention to the silver side on the outside.
3. Fold the folded edge up by about one third.
4. Open the upper opening downwards and keep the folded part unchanged.
5. Fold down the larger part below, and the edge is flush with the lower edge of the folded part.
6. Fold the two corners of the silver part inward.
7. The two corners of the yellow part below should also be folded inward.
8. Fold the yellow part and the silver part in half along the dividing line, hold it in your hand, and open the crease.
9. Spread out the sides of it properly, so that the inner part can be propped up.
10. Trim the outer edge slightly, and one ingot will be folded.
The folding method of Dajinyuanbao is as follows:
1. Prepare rectangular gold and platinum paper.
2, gold face down, folded in half.
3. Fold one side down by about one third.
4. The other side is folded in the same direction and aligned with the broken line of the golden face.
5. The four corners are folded in half with the intersection of gold and white as the axis, and then the non-gold part on it turns down into a trapezoid.
6. Open the long side.
7, plastic surgery, Jin Yuanbao completed.
Generally, people will use the gold ingot as a paper-burning sacrifice, in order to make the deceased relatives have money to spend, and also to remember those relatives. But if the gold ingot is used as burning paper, it will not be so easy, nor will it be casual. There will always be some feng shui taboos to pay attention to, lest you do something wrong and regret it.
People burn paper, and the places they generally choose are also very particular. Therefore, if the gold ingot is used as a paper burning sacrifice, it should be chosen on the roadside, especially where there are few cars and people. In this case, it will be easy to lead to the underworld, so that people who have passed away can easily receive it. But if there are many people and cars, it will hinder the passage of roads.
Generally, when burning paper, remember to burn a few copies in advance to send away those wandering souls, which is also very helpful for the next sacrifice. You will find it very smooth. If not, there will be many unexpected situations, and the whole sacrifice process will be greatly affected, so we must remember this.