1, five prong setting and five prong setting just set small claws on the ring holder, and then fastened the top of the jade tightly with these claws, thus fixing our jade. In fact, claw inlay is a common way of jade inlay, because it can show the beauty of jade to the maximum extent.

2. There are generally the following mosaic methods for jadeite: mosaic method, mosaic method and mosaic method. Clamping, that is, turning out the groove on the side of the inlay, then putting the finished jadeite into the groove and pressing it.

3. Tip installation. Refers to the small fine teeth welded on the ring holder, which can tightly press the edge of the jade body. Fork inlay is pressed on the top of jade by the inlaid claw, thus fixing the jade.

4. Primary jadeite can usually be inlaid by means of inlaying, nailing and cross-inlaying. Edge wrapping, also known as edge wrapping, is a process of enclosing the periphery of a gem with a metal edge, which is mostly used for some larger gems, especially jade with a large arch surface.

5. Yuhuan inlay can be inlaid by flanging, full circle inlay and nailing. The edge inlay of Yuhuan is generally to weld a thin metal frame or ring fixed on a metal base into a jewel seat, and then put Yuhuan into the seat.

6. The method is to coil the jade on the metal surface of the ring and stir the metal with a steel needle or shovel to make beads. Its gorgeous appearance and shining brilliance have achieved good results. Orbital mosaic method.

How do jadeite and hetian jade inlay jadeite and hetian jade inlay?

Hetian jade's ring face should be as plain as possible. Hetian jade gives people the feeling that it is mild and oily, and it is not suitable for faceted rings, which would be neither fish nor fowl.

Jade can be punched by ultrasonic waves, and the high-frequency vibration generated by ultrasonic waves makes the small needle drill move up and down at high speed to drive the abrasive to punch holes. You can also drill holes on both sides, drilling holes from both sides of the jade, just hitting the middle of the object.

First of all, inlay: this inlay technique is that the diamond is completely surrounded by the precious metal edge shaped like a picture frame. Groove inlay: it is often used to inlay a row of small stones with regular size. This inlay technique uses two pieces of metal to fix the gem from both sides. Used for setting round, narrow square and square gems. Groove inlay is like a railroad track with diamonds in the middle.

What material is the emerald ring inlaid with?

In the jade market, the jade ring inlaid in general is mainly made of some precious metal materials such as gold, K-gold and platinum.

Myanmar jade ring can usually be inlaid with gold, platinum, K gold and other metals. Gold is a simple form of chemical element gold, which is a soft, golden yellow and corrosion-resistant precious metal. Gold is a rarer, more precious and more valuable metal.

Nail inlay, also known as bead inlay, is a method to fix the surface of Yuhuan by shoveling several small nails on the edge of metal material with tools. The ring is the main part, and the gem can penetrate and reflect more light.

The mosaic material of jadeite jade is first pure gold, which is a precious metal. Because of its soft texture, it can best show the exquisite craftsmanship and details of jewelry design. Pure gold is thick and yellow, and it is not easy to be oxidized.

If the economic ability is better, the jadeite inlaid with diamonds will be more gorgeous than the jadeite inlaid with 18K gold. Diamonds are brighter than 18K gold and more expensive than 18K gold.

How to set the jade ring face?

Nailing method Also known as "bead inlay", it is an extension of accepting metal. At the edge of the metal inlay, shovel out a few small nails with something to strengthen the surface of Yuhuan. Take the ring as an example.

Jade ring can be inlaid by flanging, full circle inlay, nail inlay and so on. The edge inlay of Yuhuan is generally to weld a thin metal frame or ring fixed on a metal base into a jewel seat, and then put Yuhuan into the seat.

Jade original stone can usually be inlaid by means of inlaying, nailing, claw inlaying, etc. Edge wrapping, also known as edge wrapping, is a process of enclosing the periphery of a gem with a metal edge, which is mostly used for some larger gems, especially jade with a large arch surface.

How to set the emerald ring?

The jade ring face and the ring holder are not glued, but embedded and fixed on the ring holder. The common inlay methods of jade ring surface are: cross inlay, inlay, inlay and so on.

In general, pin placement and inlaying are more common. Snap-shot images can be widely used in ring inlay, and the pointed inlay will produce less obstruction to jadeite, making the inlay more stable and beautiful.

Jade original stone can usually be inlaid by means of inlaying, nailing, claw inlaying, etc. Edge wrapping, also known as edge wrapping, is a process of enclosing the periphery of a gem with a metal edge, which is mostly used for some larger gems, especially jade with a large arch surface.

Most rings are inlaid. Embedding Jade is embedded in it, and the surrounding metal wraps its edge. The difference between a jade table and a mosaic is that the jade table is on the same plane as the surrounding metal.

Claw inlay method: Claw inlay method is one of the most commonly used inlay methods in jewelry inlay technology. The reason is that the pointed inlay uses long metal claws (columns) to firmly fix the gem. The biggest advantage is that metal rarely hides gems and can be appreciated from all angles. This mosaic method is suitable for ordinary gemstones with large particles.