1. Sewing method with serifs
Take a diagonal line (45 degrees) 2 cm wide and 30 to 50 cm wide. When the material is thin, a few cotton yarns should be lined in the middle of the twill to make it hard and durable. When the material is thick, it can be set off without cotton yarn. The practice is: first nail it with a needle, and then sew it with your right hand. It can be used to make straight buttons, pipa buttons and solid flower buttons.
2. Machine sewing dark line method
In order to make the button disc have wireless trace and beautiful shape, the diagonal cloth strip can be folded in half, sewn together with the raw edge of the sewing machine, and then straightened into a button strip with a long needle. Can be used to make various buckles.
3. Machine sewing open thread method
Fold the Mao Kou on both sides into four layers with 2cm wide diagonal cloth strips, and then sew an open thread with a sewing machine. Can be used to make various buckles.
4. Thin copper wire winding method
First, scrape a thin layer of paste on the reverse side of the cloth to dry, draw a diagonal cloth strip with chalk according to the width of 2cm, fold the Mao Kou on both sides of the cloth strip inward into four layers, put a copper wire at the folding line in the middle of the four layers, and then scrape the paste and dry it. The bandwidth should not exceed 0.5cm, which can be used for short flower insertion and flower buckle insertion.
Second, the method of knotting
Weave the prepared zipper tape step by step according to the method in Figure 5. After weaving, it should be tightened evenly to become a solid and hard round bead.
Third, direct deduction method.
Straight buckle is the most common buckle. After the buckle belt and buckle block are finished, the length of the buckle foot should be about 5cm, and the buckle block is the same as the buckle ring.
Iv. Pipa pinch plate system
Named for its shape like a pipa. Step by step according to Figure 7. After winding, hide your head and sew it firmly on the back of the buckle with a hand needle.
Five, three-dimensional flower gusset plate system
According to different shapes, do not leave a blank core, make a solid plate from the inside out, and hide the fixed lead behind the plate.
Six, hollow gusset plate and embedded gusset plate system
When arranging hollow cores and inserts, tweezers should be used in proportion. After cooking, hide your head and fix it. The net wire in the pattern refers to the embedded core wrapped with cotton in other colors. The thin rings are colored jewelry beads.