Shading is very useful in modern life. Take shelter from the rain when it rains, and bask in the sun when it is sunny. The most important thing to buy a sun shed is to see if its shading effect is good. Because the income of the solar shed is getting better and better, especially in recent years, the solar shed is becoming more and more popular, which directly promotes the development of the solar shed market. Many friends who have never done this business have also started to do the solar shed business. Today, I take this opportunity to provide a platform for friends in need and friends in need in the future, so that everyone can know what materials are available in the sunshine shed, how to choose them and the scope of application.

What is the material of the sun shed?

The main materials of the sun shed are: tempered glass, solar panels, color steel plates, high-tech tiles, broken bridge aluminum and so on. The traditional technology of the roof of the solar shed is mostly tempered glass, and the second generation of thermal insulation solar shed and the third generation of broken bridge aluminum solar shed have been listed one after another: after changing the roof material, the problem of overheating of the glass roof sun room in summer has been well solved. The framework material of the sun shed is welded with high-strength carbon steel and decorated with colored aluminum profiles, which is firm in structure, earthquake-resistant and wind-resistant.

application area

Lighting ceilings for office buildings, department stores, hotels, villas, schools, gymnasiums, entertainment centers and public facilities; Noise barriers of expressways and urban viaducts; Awnings for agricultural greenhouses, flower greenhouses and indoor swimming pools; Subway entrances and exits, stations, parking lots, shopping malls, pavilions, lounges, anti-theft counters of Canopys Bank for corridor lights, and jewelry store security window; Advertising light box, bus stop sign, advertising display board; Office, home indoor partition, pedestrian passage, guardrail, balcony, shower room, etc. ;

How to choose the material of the sun shed?

The materials used in the sun shed of villa garden can be plastic steel doors and windows profiles, broken bridge aluminum doors and windows profiles, aluminum-clad wood doors and windows or color steel wallboard. The peripheral glass can be made of ordinary insulating glass, toughened insulating glass or high-grade dimming glass, and the skeleton can be made of plastic steel door and window profiles or broken bridge aluminum door and window profiles. If the span is greater than 1 m, steel pipes can be appropriately added as the support of the column, and fluorocarbon paint is sprayed on the surface, which has better structural stability than aluminum alloy. The sun shed in the villa garden uses hollow dimmable glass as the external wall and ceiling. The transparency and opacity of the sun room can be controlled by switch or remote control, which realizes privacy protection and effectively controls the sunshine intensity, which is very convenient for garden viewing and leisure.

Sunlight shed price

The cost of the sun shed is high or low. Generally speaking, it is mainly related to the brand, manufacturer, material and specifications of the sun shed. In addition, the more you buy some sun sheds, there will be discounts, that is, the greater the purchase volume, the more discounts and the lower the price. In addition, the quotations of different sellers and time points are different, and there are also differences.

Sunshine Peng making

1. Setting-out survey: Before fabrication and installation of wrought iron railings, the buildings shall be surveyed again, and the coordinates and axes marked in the drawings shall be taken as the benchmark to make them meet the structural requirements.

Second, material selection: carbon steel pipe material: the material of regular manufacturers is selected, the surface is smooth and straight, and there is no obvious hot rolling trace.

Third, the production requirements

1. Further design: Before the production of the sun shed, Party B shall carry out secondary design according to the shape and color of the sun shed shown in the garden landscape drawings, and the design scheme can be processed and manufactured only after it is approved by Party A's design. ..

2. Connection mode: The main beam and column of the sunlight shed are embedded with 200* 160* 12 steel plates and iron, and connected by M 16* 190 chemical anchor bolts. The keel shall be laid horizontally and vertically, so as to ensure that the contact area with the sun board is flat and the sun board is fastened firmly.

3. Welding and polishing: the joint is fully welded, polished and polished; Weld ≥5_, the weld is even and smooth without obvious defects. There is no virtual welding, missing welding and surfacing welding, and the joint is polished flat, smooth and burr-free.

4. Surface treatment: Before the metal surface is formed, it must be polished, derusted and coated with antirust paint. After molding and welding, clean the solder joints and apply antirust paint and topcoat (the color is determined by the owner).

5. The aluminum alloy buckle for fixing the sun panel must wear waterproof tape.

6. The layering is fixed on the buckle with glass glue, and both sides are sealed with glass glue.

7, glass glue joint full uniform, smooth, airtight and impermeable.

8. The cutting size of the sunlight plate is accurate, and the installation must be smooth, firm and free from looseness. Silicone weatherproof sealant is compact, flat and pollution-free.

9, finished product protection, prevent welding, cutting and other sparks and flying particles from damaging the sun panel. It is forbidden to trample at will.

Sunlight shed installation

Elastic line: according to the elevation of the drawing, the position and size of the solar panel ceiling and the measured center line, the position line of the main skeleton of the solar panel ceiling will pop up.

Embedded parts: according to the position of the main skeleton of the ceiling of the sun panel on the elevation control line, check whether the elevation of the upper surface of the hole meets the design requirements. If there is any difference, chisel or level with high-strength cement mortar. After reaching the strength, set out the position line of the expansion bolt according to the size of the embedded steel plate in the detailed drawing of the deepening design node, then drill and place the expansion bolt, install the steel plate and fix it with the expansion bolt. Then cast the center line of the main skeleton on the embedded steel plate.

Main skeleton installation: according to the position line of the main skeleton of the solar panel ceiling, install the two ends first, and then install the middle part. Its method: after assembling the main skeleton of 60mm×60mm×3mm square steel tube (galvanized) on the roof, manually put it on the positioning line, hang the vertical plane with iron wire, and weld it with the embedded steel plate after temporary fixing in the middle. After the installation of the main skeleton at both ends, pull three longitudinal steel wires with the height of 1500mm in the middle and on both sides (measured upward from the brackets at both ends of the steel plate), and then install them one by one from one end to the other until they are all completed.

Auxiliary frame installation: After the main frame of solar panel ceiling is installed and fixed, install the auxiliary frame of 60mm×60mm×3mm square steel of solar panel ceiling, adjust the position, and weld and fix it with the main frame after leveling. When installing the sun panel, apply moisture-proof agent.

Then install the sun board: according to the typesetting position of the deepening design, install the sun board with a thickness of 20mm, and the edge, longitudinal seam and transverse seam of the sun board after installation are in a line.

Glue and install battens: After comprehensively checking the installation quality of external solar panels, install external gold ternary solar panels, and install special aluminum alloy battens after applying weather-resistant glue. The spacing and position of the screws for installing the battens must meet the requirements of the drawings.

Installation of inner solar panel: Install inner solar panel with thickness of 16mm according to the position in the figure. When installing, the bottom of the upper sun panel should be wiped clean with a white towel. At the same time, it is allowed to install the inner sunshine board after cleaning, so as to avoid the interlayer pollution that cannot be cleaned and affect the macro effect. After all the sun panels are installed, the periphery of the ceiling eaves of the sun panels must also be constructed according to the nodes in the drawings. Only after the eaves are completely closed (including the gables with glass curtain walls) can the protective shed be removed. The protective shed must be carried out in accordance with the requirements of scaffold removal, and the finished product should be protected to prevent the finished product from being broken.