1, with pointed inlay, the jade is buckled on the bracket with metal claws, and the jade has the least cover, so that the surrounding light can shine on the jade, showing its unparalleled elegance. Pointed mosaic is the most commonly used mosaic method for jadeite.
2, design sketch, generally speaking, before the jade inlay, the designer will first conceive and design a sketch. Carve the wax board. The master carves the wax board by hand according to the sketch. Metal stamping is to select some suitable metals, such as K gold and silver, as materials to make various parts.
3. Claw setting means to leave small claws on the ring holder, and then use these small claws to tightly fasten the top of the jade, thus fixing our jade. In fact, claw inlay is a common way of jade inlay, because it can show the beauty of jade to the maximum extent.
4. Design draft, which is the first step and a very important step of jade inlay. Jewelry designers draw sketches according to the shape and size of jadeite raw materials, and then give them to skilled jewelry masters to complete their works.
5. There are generally the following mosaic methods for jadeite: mosaic method, mosaic method and mosaic method. Clamping, that is, turning out the groove on the side of the inlay, then putting the finished jadeite into the groove and pressing it.
6. Tip installation. Refers to the small fine teeth welded on the ring holder, which can tightly press the edge of the jade body. Fork inlay is pressed on the top of jade by the inlaid claw, thus fixing the jade.
Method for knot jadeite pendant
The tying rope of the jade pendant is divided into three steps: baking the rope, knotting it repeatedly, and handling the end. First, heat the two ends of the two ropes with fire, pinch the ropes together while they are hot, and then pass through the hole of the jade pendant. Leave a suitable binding length.
Get the tools ready and cut the rope. First, use a prepared lighter to light both ends of the rope and quickly twist it into filaments. Be careful not to burn your hands, and then cut off the irregular parts at both ends of the rope with scissors. Through the hole of the pendant.
Prepare pendant, braided rope and other materials, thread the rope through the pendant, and then tie the rope. Hold the hanging rope in your hand and wrap it around your finger twice.
Roast the rope with fire, pinch it while it is hot, and let it pass through the hole. Both ends of the rope pass through the hole of the hook together. According to personal preference, set aside a binding length of appropriate length, such as 1cm. Open one end of the rope and tie a knot at the other end. Then tie a knot on the other side. Then tie a knot in turn.
Folding knot: Jade necklace can be tied in half. First, fold the rope in half and pass through the jade pendant. Then, use a circle to thread the rope at the end of the line into the rope and tie the rope. Then, adjust the jade necklace to see if it is strong.
How to inlay jade pendant
1, hem inlay. In the flanging inlay of jade ice seeds, a thin metal frame or ring fixed on a metal base is generally welded into a jewel seat, and the jade ice seeds are placed in the seat.
2. The common inlay styles of Jade Ruyi are: buckle inlay and ring inlay. Ring inlay is suitable for small objects with small size and thin thickness to increase the overall extension. Buckle inlay is suitable for larger and thicker objects, which is decorative and convenient to wear.
3. put on the rope. First put the rope through the hole of the jade pendant, remember that it is worn together, then put down the two ropes above, move the rope on the right to the left, and be sure to press on the two ropes. Knitting. Take off the rope on the left, put it in front, and then put it under.
4, worn around the neck, usually people wear jade ruyi as a pendant, hanging on the chest, simple and generous. Hanging at the waist, the jade pendant worn by the elderly is usually hung at the waist.
5, this needs to be decided according to personal taste. Generally, the simple Ruyi jade is very beautiful by directly stringing it into a necklace with a bead chain. However, jade beads require the same size, and the beads are the same size, so that the whole bead chain will be coordinated and bring beauty to people.
How is the jade ring inlaid? How is the jade ring inlaid?
The common inlay methods of jade ring surface are: cross inlay, inlay, inlay and so on.
Jade original stone can usually be inlaid by means of inlaying, nailing, claw inlaying, etc. Edge wrapping, also known as edge wrapping, is a process of enclosing the periphery of a gem with a metal edge, which is mostly used for some larger gems, especially jade with a large arch surface.
Nailing method Also known as "bead inlay", it is an extension of accepting metal. At the edge of the metal inlay, shovel out a few small nails with something to strengthen the surface of Yuhuan. Take the ring as an example.
Jade ring can be inlaid by flanging, full circle inlay, nail inlay and so on. The edge inlay of Yuhuan is generally to weld a thin metal frame or ring fixed on a metal base into a jewel seat, and then put Yuhuan into the seat.
Increase the overall extension. Full circle inlay is suitable for Yuhuan with small head and thin thickness to increase the overall extension. Nailing: shovel a small nail on the edge of the metal inlay to fix the Yuhuan, so that the light can pass through the Yuhuan perfectly. Nailing is to shovel a small nail at the edge of metal inlay.
Geometry is boldly applied to the mosaic style of jade ring. This kind of ring is deeply loved and sought after by young people. Its sharp edges and corners make the moisture and purity of jadeite present to people in the most direct form. The claws are fixed with metal claws, which can be generally divided into three claws, four claws and six claws.
Cross stitch frame mosaic
1. First soak the embroidered cross stitch in detergent water and clean it, then dry it for later use. This is the back of the frame. Take out the cardboard and clean the instrument glass inside and outside the frame.
Don't use too much force when washing. Soak it in a neutral detergent first. If it is not particularly dirty, dry it in the shade with clear water! When installing, all aspects will be fixed with double-sided tape, which is generally not a big problem and will not affect the overall effect.
3. Embroidering cross-stitch should always run in the water of detergent, and then it can be used only when it is dry. Take out the card and clean the inside and outside of the glass frame. After taking a shower, I began to iron the cross-stitch cloth by hand.