Crystal drops (hard glue) are not completely solidified, only half of them are dry, which may cause uneven mixing or incorrect proportion. This situation can only be repeated. When stirring, it must be strictly weighed. When stirring, it must be stirred until there is no silk. After drying, it will be irreparable.

It takes only 20 hours to complete the processes of weighing, balancing, stirring, dropping, rapid fire defoaming and heating curing. However, we must be careful in the process of mixing, and we need to control the time. It will solidify if it takes too long, so be careful when making drops.

Extended data:

The more epoxy crystal glue is dispensed at one time, the faster the curing speed and the greater the heat release. Therefore, the dosage of epoxy crystal glue should be controlled once to avoid shortening the available time due to the fast curing speed, and the mixed glue should be used up in the shortest time.

In addition, the available time is 100g, when the viscosity of the mixed glue solution doubles at 25℃, and the glue solution shall not be used after the operational time.

Some people will have mild skin allergies and mild itching after long-term contact with glue. It is recommended to wear protective gloves when using. Please wipe your skin with propionic acid or alcohol and wash it with detergent. Before large-scale use, you can try it out in small batches to master the skills of using the product and avoid operational mistakes.