2, with a paper towel dipped in a little water (banana oil) in the polished place gently wipe back and forth. Note: Tianna water is very corrosive to plexiglass, so you must not use too much force. Otherwise, the plexiglass lampshade will turn white, turn over hair and sand.
3. Use a special towel for car washing to smear the traces of latex car, wax it with appropriate strength and wipe it back and forth repeatedly along the scratch texture for many times, and add car wax at the same time until the lampshade is as bright as new, leaving no traces.
Secret recipe for repairing yellowing of headlight lampshade
Use adhesive remover, spray the yellow lampshade evenly, wait for three minutes, and then wipe it with a wet rag to ensure that you have a lampshade as bright as new. If the lampshade is still yellow after being wiped with a rag, the stubborn residue can be treated with a polishing machine to polish off the aged lampshade layer.
On the one hand, the yellowing of lampshade is caused by sun exposure, on the other hand, it is caused by oxidation reaction. The high temperature of headlights further aggravated the oxidation reaction. The corrosive gas or acid rain in the atmosphere is the direct cause of the yellowing of the lampshade. Therefore, you must choose a cool environment when parking, and especially wipe the lights when washing the car to remove stains or bird droppings on the surface.
The headlights of the car are in the same hood, including high beam (headlight), low beam, turn signal and daytime running light. High beam and low beam are responsible for road lighting. The yellowing of the lampshade will reduce the brightness and make the light diverge, especially the lighting effect of the high beam, which may affect the driving safety. Therefore, it is necessary to clean the lampshade in time or directly replace it. (Photo/Text/Photo: Ask and Answer Animals) @20 19