Emerald is emerald. If it is worn for a long time, it must be re-polished to fundamentally solve the problem of unsmooth, and it will not take long. It depends on the polishing process of the jade bracelet itself. If it is a soft and polished bracelet, it can be wrapped in fine cotton cloth and rubbed every day to slowly recover the oil.

The surface of jadeite is not smooth, so it can be polished by itself. The jade bracelet must have been processed, even if the surface is uneven, it is also a processing flaw, which is not too exaggerated. It is estimated that it is not smooth, and this situation is still easy to polish back.

If jadeite loses its luster, it usually needs to be cleaned once. Soak in clear water for more than 2 hours, then wash it again to make the jade absorb water, and then take it out to dry. Avoid contact with high temperature environment, do not put it in direct sunlight, and put a glass of water in its storage place.

Jade bracelets are no longer smooth after being worn for a long time, but they can be polished to reproduce their luster. Minimalist polishing method. After taking it out, apply a proper amount of toothpaste to the bracelet, evenly apply toothpaste to the bracelet with a toothbrush, and polish it repeatedly for about ten minutes. Wash it in warm water, apply a little peanut oil and rub it back and forth with a pair of glasses cloth.

The surface of the jade bracelet is rough and not smooth, so you can find a professional jewelry store to polish it. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping.

How does the jade bracelet feel a little rough and astringent?

1, jadeite is not polished well during processing, so you can find a jade shop master to process it.

2. It may be fake and shoddy products. First confirm the authenticity of the bracelet. If it is true, see if there is any problem with polishing the inner ring of the bracelet. Generally speaking, sheep fat jade is very oily, so it should be very comfortable to wear, not as cold as jade, but a warm feeling.

3, not necessarily the newly bought jade, polished and waxed, you look smooth and perfect, but after wearing it for a few days, the surface light is gone, which is the true color of jade. Cheap jadeite is not conducive to farming, which is even more obvious. Watching my hair dry, dull and waterless. It's not very strong, otherwise it will be like this when you buy it, and you didn't notice it.

4. Generally, uneven polishing will not occur. The reason for uneven polishing of jade bracelets is professionally called mine shortage. It is because the jadeite germplasm is thick and the gap between crystals is large, which leads to the failure of polishing. This situation is caused by the poor quality of jadeite, which is difficult to solve even if it is re-polished. This is the only way.

How is the jade bracelet leveled when it is made?

1, paste, and coat polishing powder on the carved jade surface. Push grinding, grinding the jade surface with a 2000-mesh grinding wheel. If there are many pits, the surface should be polished on the basis of smoothing the pits. Diamond powder is coated on the surface of jadeite, and the surface of jadeite is polished with a hard brush.

2. It is not normal for jadeite to be unevenly polished. Jade bracelet, with the current production level, is purely machined, and there is almost no uneven polishing. The reason for uneven polishing is not production, but often jade.

3. The processing of jade bracelets generally goes through five steps: scribing, embryo taking, shaping, polishing and cleaning.

4. Stone cutting: cut the original stone into pieces to judge whether the water quality and color of the bracelet are good, which determines the value of the finished bracelet.

What should I do if the jade bracelet is not smooth after being worn for a long time?

1. If there are only scratches or small flaws on the surface of the jade bracelet, you can find a jade bracelet processing master to polish it and restore its original appearance. If there is a small crack in the jade bracelet, but it will not pose a threat to the firmness of the jade bracelet, it is recommended not to carry out any repair to avoid the deterioration of the small crack due to improper repair.

2. The rough surface of the jade bracelet may be the wear caused by poor polishing or long standing, which can be re-polished to restore the surface luster. You can polish it yourself if you can. If there are no conditions, you can find a place where jade is processed and polished.

3. Remedial measures after wearing jadeite If there is a small flaw on the surface of jadeite, it can be repaired by polishing, and you can directly find a jade bracelet processing master to do it. If there is a small crack on the jade surface, but it does not affect the firmness of the jade itself, it is recommended to keep it as it is, so as not to cause the crack to expand during the repair process.

4. Be careful not to touch chemicals or solutions. When taking a bath or doing housework, you must not wear Hetian jade bracelet, because detergent and shower gel are chemicals, which can easily corrode Hetian jade bracelet, so take off the bracelet when taking a bath or washing dishes.

5. When the surface of the jade bracelet is not smooth, you can take out a proper amount of toothpaste and smear it on the bracelet, then use a toothbrush to evenly smear the toothpaste on the bracelet and polish it repeatedly 10 minute, and then put the jade bracelet in warm water for cleaning.

6. If the surface of the jade bracelet becomes rough and no longer smooth, the jade bracelet can be polished to restore its luster. Wipe the jade bracelet with a wet towel first, then evenly apply toothpaste on the jade bracelet and polish it repeatedly 10 minute.

What is the uneven polishing of jade bracelets?

1, jade bracelet, with the current production process, generally there will be no uneven polishing. The reason for uneven polishing of jade bracelets is professionally called mine shortage. It is because the jadeite germplasm is thick and the gap between crystals is large, which leads to the failure of polishing.

The hardness of jadeite is very high, which can only be compared with diamonds. With the current technology, if it is uneven, it is probably the material itself. Emerald belongs to pyroxene, monoclinic system, perfect cleavage.

3. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping. Put the carved jade into the drum with a grindstone.

4. The surface of jade is not smooth, so it can be polished by itself. The jade bracelet must have been processed, even if the surface is uneven, it is also a processing flaw, which is not too exaggerated. It is estimated that it is not smooth, and this situation is still easy to polish back.

5, jade polishing is uneven, in fact, you can choose to re-polish for processing. Generally speaking, jade ornaments will go through a process called polishing in the production process. Rough jadeite looks rough, the color is dim, and it is not moist at all. The polished jadeite has stronger stereoscopic impression, brighter color and more sufficient water head.

6. This is a defect caused by workers' lack of skills in cutting and polishing. It also shows that the material of this bracelet is not very good. There is no doubt that good jade materials will match good jobs.

The jade bracelet was worn for two days and found uneven. Are you wearing it?

There is nothing wrong with this jade bracelet. It has orange peel on the surface and flying wing structure inside. It's a light oil green jade bracelet, with glutinous varieties, and the price is not very expensive. You can cross-reference this type like a picture.

Whether there is a small pit on the surface of the newly bought jade bracelet is a flaw depends on whether the pit is naturally formed or caused by post-processing. If it is the material itself, the germplasm is poor and the crystal structure is loose, there will be pits. Improper handling will also lead to small pits on the surface of the jade body.

There are two reasons why there are pits on the jade bracelet: the first is that the germplasm is poor and the crystal structure is loose, which leads to insufficient minerals, which is the problem of its own material. The second is that the processing is not in place, resulting in small pits on the surface of the jade blank, which can be removed by re-polishing, which is a problem of processing technology.

This bracelet is natural jade, don't worry. The bean is waxy and the head is average. There is a slight light blue background and some obvious crystals in the picture, and the graininess is slightly stronger. You can clearly see the cotton wool.

The surface of the jade bracelet is rough and not smooth, so you can find a professional jewelry store to polish it. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping. Put the carved jade into the drum with a grindstone.